AMSOIL Synthetic Multi-Purpose GreaseJune 5, 2015
AMSOIL V-Twin Synthetic Primary FluidJune 5, 2015
AMSOIL DOMINATOR Synthetic Racing Grease
AMSOIL DOMINATOR Synthetic Racing Grease is especially formulated for high-speed/high-temperature performance. It is engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose. Because it effectively reduces friction, DOMINATOR Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.
DOMINATOR Synthetic Racing Grease
Exceptional High-Speed/High-Temperature Performance
AMSOIL DOMINATOR® Synthetic Racing Grease is engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions.
Package sizes include:
- 14-oz. Cartridge
DOMINATOR Racing Grease is engineered with extreme-pressure additives to deliver excellent wear protection in heavily loaded, high-speed racing applications. Its high-performance anti-wear additive package helps ensure long component life.
Because it effectively reduces friction, DOMINATOR Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.
Although DOMINATOR Racing Grease is specially formulated for high-temperature/high-speed applications, it also delivers superior protection for low-speed bearings, providing racing components with the exceptional load-bearing capacity of a heavy-duty grease.
DOMINATOR Racing Grease pairs a high-viscosity-index synthetic base oil with a top-quality lithium complex thickener known for its extraordinary performance in temperature extremes. It offers excellent low-temperature pumpability and high-temperature consistency for dependable protection in all temperatures.
Resists Oxidation, Corrosion & Washout
DOMINATOR Racing Grease contains a robust package of oxidation inhibitors, helping prevent grease breakdown and component surface damage. Its excellent adhesion and cohesion properties allow it to resist water washout during operation in wet conditions. A premium blend of corrosion inhibitors further protects against rust and corrosion formation.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
For warranty information, visit www.amsoil.com/warranty.aspx.
|Typical Technical Properties|
|AMSOIL Synthetic Lithium Complex Racing Grease||DOMINATOR Synthetic Racing Grease||NLGI GC-LB|
|NLGI Consistency Grade||2 EP||NR*|
|NLGI Performance Grade||GC-LB||NR*|
|Penetration (ASTM D 217) 25° C [77° F], 0.1 mm Worked 60 strokes||265-295||220 – 340|
|Dropping Point (ASTM D 566) °C [77° F]||288 (550)||220 (428)|
|High Temperature Life (ASTM D 3527) hours||100||80 min|
|Water Washout (ASTM D 1264) 79° C [175° F] % loss||5.0||15 max|
|Water Spray Off (ASTM D 4049), % max||18.0||NR*|
|Rust and Corrosion (ASTM D 1743)||pass||pass|
|Oil Separation (ASTM D 1742) 24 hr. @ 25° C [77° F], % loss||2.8||10 max|
|Leakage (ASTM D 4290), g*||5.0||10 max|
|Four-Ball Wear Test , mm scar (ASTM D 2266)||0.52||0.9 max|
|Four-Ball EP, kgf (ASTM D 2596)
Load Wear Index
|Timken OK Load Test (ASTM D 2509), lbs.||60||NR*|
|Fretting Wear (ASTM D 4170) mg*||8.5||10 max|
|Low Temperature Torque (ASTM D 4693) n·m, max @ -40° C [-40° F]||7.2||15.5|
|Fortified with Moly Compound||No||NR*|
|Compatibility with other greases||Excellent||NR*|
|Elastomer Compatibility (ASTM D 4289)
Volume Change, %, GC
Volume Change, %, LB
Hardness Change, durometer-A points, GC
Hardness Change, durometer-A points, LB
|-5 to +30
0 to +30
+2 to -15
0 to -10
|* NR: Not Required for NLGI GC or LB labeling|
GRG Packaging Information
|Code||Package Size||Unit of Measure||Product|
|GRGCR (GRGCR-EA)||14-Oz. Cartridge||Each||DOMINATOR Synthetic Racing Grease NLGI#2 GC/LB : (1) 14-OZ. CARTRIDGE|
|GRGCR (GRGCR-CA)||14-Oz. Cartridge||Case of 10||DOMINATOR Synthetic Racing Grease NLGI#2 GC/LB : (10) 14-OZ. CARTRIDGES|
|GRGCR (GRGCR-PK)||14-Oz. Cartridge||Pack of 40||DOMINATOR Synthetic Racing Grease NLGI#2 GC/LB : (40) 14-OZ. CARTRIDGES|