AMSOIL Synthetic Transmission Oils for Automatic and Manual Transmissions
Lower the Operating Temperatures While Providing Peak Performance and Reliability for your Automatic or Manual Transmission
AMSOIL provides high performance synthetic lubricants for both your automatic and manual transmissions. Smoother shifting characteristics, cooler operation, and less drag (more horsepower to the ground!) are benefits received from all AMSOIL synthetic transmission fluid and oil products. Whether you want to pull a large trailer, add more horsepower to the track for racers, extend the equipment life of heavy equipment transmissions, help avoid expensive repairs, or lower your operating costs, AMSOIL has the high performance synthetic oil transmission fluid for your application.
While manual transmission cars shift gears by the command of its operator, an automatic transmission acts as an energy transfer media and shifts automatically based on a variety of variables, including speed and load. Making use of a hydraulic system, in addition to a network of gears and bearings, the lubrication requirements for an automatic transmission are slightly different than those of a manual transmission, requiring a lubricant of different characteristics. Because automatic transmissions and their internal components are commonly subjected to extensive idling, frequent stops, cold temperature operation, sustained hot weather operation and trailer towing, it is important that they are protected by the correct fluid—high-quality transmission fluids—throughout their service life.
AMSOIL Synthetic Automatic Transmission Fluid provides automatic transmission cars with superior friction protection and performance over a wider temperature range than conventional automatic transmission fluids while avoiding breakdown, helping prevent transmission failures, and maintaining its viscosity in temperature extremes.
Synthetic Transmission Fluids and Oils
AMSOIL Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid
AMSOIL Signature Series Multi-Vehicle Synthetic ATF is engineered to outperform conventional automatic transmission fluids and exceed the performance requirements of most North American, European and Asian vehicles. Transmissions in commercial vehicles, SUVs, trucks and vans – particularly those used for hauling or towing – are subjected to severe-service operation and increased heat. Elevated temperatures cause fluids to break down, allowing damaging metal-to-metal contact and the formation of sludge and deposits. The problem is worse in modern transmissions with more gears, clutch packs and narrow oil passages that require clean, high-quality fluid to achieve maximum performance and life. AMSOIL Signature Series Synthetic Automatic Transmission Fluid is specifically formulated to withstand the rigors of heavy towing, elevated temperatures and challenging terrain. It remains fluid in sub-zero temperatures and provides reserve protection during heavy use and even abuse.
AMSOIL Signature Series Fuel-Efficient Synthetic Automatic Transmission Fluid
AMSOIL Signature Series Fuel-Efficient Synthetic Automatic Transmission Fluid is a fuel efficient automatic transmission fluid recommended for GM, Ford, Honda, Nissan and Toyota transmissions where lighter viscosity oil is required. The highly-specialized properties of this light-bodied fluid provide outstanding performance without compromising protection, even in severe operating conditions. Automatic transmissions have become increasingly complex as vehicle manufacturers strive to improve efficiency while satisfying consumer demands. Smaller, smoother-shifting transmissions with longer fluid life capabilities and heavier load capacities are now standard. Traditional ATFs, however, are unable to meet these extreme requirements, and new fluids have emerged with each new advancement in transmission engineering. Provides the same excellent protection and performance as AMSOIL Signature Series Multi-Vehicle ATF.
AMSOIL OE Multi-Vehicle Synthetic Automatic Transmission Fluid
Modern automatic transmissions are more complicated than their predecessors. Today’s designs feature more gears, clutch packs and narrow oil passageways that require a steady supply of high-quality fluid. Without it, wear and sludge formation can lead to reduced performance and even failure, requiring thousands of dollars in repairs. AMSOIL OE Synthetic Automatic Transmission Fluid provides passenger-car/light-truck transmissions excellent wear protection, sludge resistance and extreme-temperature performance throughout original equipment manufacturer (OEM)-recommended drain intervals.
AMSOIL OE Fuel-Efficient Synthetic Automatic Transmission Fluid
Modern automatic transmissions are more complicated than their predecessors. Today’s designs feature more gears, clutch packs and narrow oil passageways that require a steady supply of high-quality fluid. Without it, wear and sludge formation can lead to reduced performance and even failure, requiring thousands of dollars in repairs. AMSOIL OE Synthetic Automatic Transmission Fluid provides passenger-car/light-truck transmissions excellent wear protection, sludge resistance and extreme-temperature performance throughout original equipment manufacturer (OEM)-recommended drain intervals.
AMSOIL Synthetic CVT Fluid
Continuously variable transmissions (CVTs) create unlimited gear ratios using a belt or chain running between two variable diameter pulleys. CVTs require a unique transmission fluid with specialized frictional characteristics designed to ensure the belt or chain remains in contact with the pulleys without slipping. AMSOIL Synthetic CVT Fluid provides outstanding metal-to-metal frictional properties and excellent protection and performance for CVTs throughout vehicle manufacturer-recommended drain intervals. In elevated heat, Synthetic CVT Fluid’s thermally stable formulation guards against the harmful effects of thermal breakdown. It resists the formation of varnish that can threaten transmission performance and life. It is Warranty Secure and will not void your vehicle’s warranty. AMSOIL Synthetic CVT Fluid is a cost-effective, high-performance alternative to original equipment manufacturer (OEM) fluids.
AMSOIL Synthetic Dual Clutch Transmission (DCT) Fluid
Dual-clutch transmissions (DCTs) are automatic transmissions based on the architecture of manual transmissions. The complex system essentially consists of two manual transmissions in the same housing. As one clutch is engaged, the other readies the next appropriate gear, minimizing the interruption of power and improving performance and efficiency. A specially formulated fluid is required to maintain the high-performance output of these advanced transmissions. AMSOIL 100% Synthetic DCT Fluid is designed to protect high-tech dual-clutch transmissions during the most intense, high-heat operating conditions. It provides the fast, smooth shifts drivers expect.
AMSOIL Torque-Drive Synthetic Automatic Transmission Fluid
AMSOIL Torque-Drive Synthetic Automatic Transmission Fluid is engineered for outstanding performance in heavy-duty transmissions manufactured by Allison, Voith, ZF and other heavy-duty transmissions. It provides excellent protection in temperature extremes and ensures consistent, smooth clutch engagement over the life of the fluid. AMSOIL Torque-Drive is recommended for use in heavy-duty, on- and off-highway automatic transmissions for many applications, including Allison® TES 295, TES 389, C-4; Voith® 55.6336.XX; ZF® TE-ML 20C; GM Dexron® III; Ford Mercon®; Mercedes-Benz® 236.10. Examples of operations that benefit from using AMSOIL Torque-Drive include municipal or transit buses, motor coaches, garbage haulers, motor homes, delivery vans, emergency vehicles, school buses, dump trucks, utility vehicles, cement trucks, line haul trucks and tow trucks. AMSOIL Synthetic Torque-Drive™ Automatic Transmission Fluid is recommended as a direct replacement for TranSynd® Synthetic ATF in heavy duty, on and off highway automatic transmissions manufactured by Allison®.
AMSOIL Super Shift® Synthetic Racing Transmission Fluid
AMSOIL Super Shift® Synthetic Racing Transmission Fluid resists extreme heat to virtually eliminate slippage and improve shift performance while protecting against wear, helping racers improve on the track and save money in the garage. For maximum success, racers need to be confident their transmission is going to shift smoothly and operate properly no matter how hard they push their vehicle. AMSOIL Super Shift® Synthetic Racing Transmission Fluid virtually eliminates slippage, promotes positive clutch engagement and improves overall shift performance, helping racers improve on elapsed times. Its unmatched transmission friction performance provides high holding capacity for maximum torque transfer and brake power, reduced wear and longer clutch plate life. Also recommended for applications where Type F fluid is specified.
AMSOIL Synthetic Synchromesh Transmission Fluid 5W-30
AMSOIL Synthetic Synchromesh Transmission Fluid 5W-30 meets and exceeds the gear, bearing, synchromesh and seal demands found in automobiles and light trucks. This specialized synthetic lubricant is specifically designed for manual transmissions and transaxles with synchromesh systems that require light viscosity, non-extreme pressure fortified oil. It is formulated with advanced additive technology to provide proper friction characteristics for smooth shifting without grinding or bump shifting, while providing the ultimate in gear and bearing protection. AMSOIL Synthetic Synchromesh Transmission Fluid 5W-30 replaces several OEM fluids including those from GM, Chrysler, Land Rover, MG, Honda and Mini Cooper.
AMSOIL Synthetic Manual Transmission and Transaxle Gear Lube SAE 75W-90 API GL-4
AMSOIL Synthetic SAE 75W-90 Manual Transmission and Transaxle Gear Lube meets and exceeds the gear, bearing, synchromesh and seal demands found in automobiles and light trucks. This synthetic lubricant is designed to meet the special requirements of certain manual transmissions and transaxles, such as the New Venture NV4500. AMSOIL Synthetic Manual Transmission Gear Lube meets 75W/80W-90 viscosity requirements and exceeds API GL-4 performance requirements for many front-wheel-drive vehicles. Its excellent gear protection, extreme-temperature performance and durability promote maximum longevity and reduced maintenance costs.
AMSOIL SAE 50 Long-Life Synthetic Transmission Oil
AMSOIL SAE 50 Long-Life Synthetic Transmission Oil is specially formulated to meet the demanding requirements of manual transmissions found in high-torque, heavy-duty line-haul trucks and other commercial applications. Its synthetic base stocks and premium additives help reduce gear and bearing wear, improve shifting and extend transmission life throughout drain intervals of up to 500,000 miles/five years. AMSOIL Long-Life Synthetic Transmission Oil’s high viscosity index translates into better high- and low-temperature performance compared to conventional fluids. In cold weather, it provides easier shifts and reduced fluid drag for increased fuel economy.
AMSOIL Synthetic Powershift Transmission Fluid SAE 10W
AMSOIL Synthetic Powershift Transmission Fluids are formulated for heavy-duty powershift transmissions, and provide outstanding friction performance for enhanced clutch engagement. They prevent slippage and glazing, and are shear stable and anti-wear fortified. AMSOIL Synthetic Powershift Transmission Fluids resist high-temperature oxidation, varnish & sludge formation, and contain superb cold-flow properties. They offer unmatched transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life. AMSOIL Synthetic Powershift Transmission Fluid SAE 10W may be used up to 60,000 miles or one year (whichever comes first) in CD-50 manual transmission applications or as specified by the OEM. Drain intervals may be extended with oil analysis.
AMSOIL Synthetic Powershift Transmission Fluid SAE 30
AMSOIL Synthetic Powershift Transmission Fluids are specifically designed for high-torque heavy-duty powershift transmissions. Formulated for extended drain intervals, Powershift Transmission Fluids contain top-quality synthetic base stocks and a high level of top-quality additives selected specifically for powershift transmissions. They offer unmatched transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life. AMSOIL Synthetic Powershift Transmission Fluid SAE 30W may be used up to 60,000 miles or one year (whichever comes first) in CD-50 manual transmission applications or as specified by the OEM. Oil analysis is recommended if extending service intervals beyond equipment manufacturer recommendations.
AMSOIL Synthetic Powershift Transmission Fluid SAE 50
AMSOIL Synthetic Powershift Transmission Fluids are specifically designed for high-torque heavy-duty powershift transmissions. Formulated for extended drain intervals, Powershift Transmission Fluids contain top-quality synthetic base stocks and a high level of top-quality additives selected specifically for powershift transmissions. They offer unmatched transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life. AMSOIL Synthetic Powershift Transmission Fluid provides extended service life beyond conventional petroleum fluids if Synthetic Powershift Transmission Fluid is kept free of dirt and moisture. Oil analysis is recommended if extending service intervals beyond equipment manufacturer recommendations.
AMSOIL V-Twin Synthetic Transmission Fluid
AMSOIL V-Twin Synthetic Transmission Fluid is specifically designed for bikers who prefer a dedicated transmission fluid over a multi-use lubricant. Its frictional properties deliver smooth shifting and it helps quiet transmission noise, letting riders focus on enjoying the ride. V-Twin Synthetic Transmission Fluid is Warranty Secure® and will not void your motorcycle’s warranty. It is a cost-effective, high-performance alternative to original equipment manufacturer (OEM) fluids.
AMSOIL V-Twin Synthetic Primary Fluid
AMSOIL V-Twin Synthetic Primary Fluid is purpose-built for bikers who prefer a dedicated primary chaincase lubricant. Its balanced formulation delivers consistent clutch feel for confident takeoffs, helping riders avoid killing the engine. It also protects components against wear to help riders get the most out of their bikes. V-Twin Synthetic Primary Fluid is Warranty Secure™ and will not void your motorcycle’s warranty. It is a cost-effective, high-performance alternative to original equipment manufacturer (OEM) fluids.
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil SAE 5W-30
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is an all-weather Universal Tractor Transmission Oil (UTTO) engineered to meet the tough demands of heavy-duty, hydraulic-powered farm and commercial equipment. Its unique formulation of synthetic base stocks and additives effectively reduces wear, resists heat, protects against rust and extends fluid and equipment service life. It has a high viscosity index to maintain its lubricity for wear protection at high operating temperatures, and it flows at temperatures down to -58°F (-50°C) for improved equipment operation at low temperatures. Synthetic Tractor Hydraulic/Transmission Oil exceeds the viscosity requirements of the all-weather specifications of both Case New Holland 3525 and 3526 (formerly Ford New Holland FNHA-2-C-200 & 2-C-201) and John Deere J20C & J20D, helping eliminate the need for seasonal oil changes.
AMSOIL SAE 20W-50 Synthetic Hydrostatic Transmission Fluid
Commercial Grade
AMSOIL SAE 20W-50 Synthetic Hydrostatic Transmission Fluid is specifically formulated to deliver smooth, responsive operation in zero-turn mowers, stand-on mowers and other equipment professionals rely on to make a living. It fights wear and viscosity loss during continuous, severe-service operation, maximizing mower speed and operability. Unlike motor oils, Synthetic Hydrostatic Transmission Fluid is purpose-built to withstand the unique demands of hydrostatic transmissions. It lasts up to 2X original equipment manufacturer (OEM) recommendations, helping professionals save money and reduce downtime.
AMSOIL Synthetic ATV/UTV Transmission & Differential Fluid
Reserve protection for heavily loaded gears. AMSOIL Synthetic ATV/UTV Transmission & Differential Fluid is engineered to deliver upgraded performance for hard-working and performance ATVs and UTVs. Its outstanding severe-service formulation allows riders to confidently and safely push their machines to the limit, whether tackling tough chores around their property or riding aggressively on the trail. AMSOIL synthetic technology protects heavily loaded gears against wear. AMSOIL Synthetic ATV/UTV Transmission & Differential Fluid is Warranty Secure™ and will not void your ATV or UTV warranty. It is a cost-effective, high-performance alternative to OEM fluids.
AMSOIL Synthetic ATV/UTV Powertrain Fluid
AMSOIL Synthetic ATV/UTV Powertrain Fluid is designed for enthusiasts who want the best protection against wear and performance-robbing deposits. It is recommended for Polaris ATV/UTV transmission/differentials and front drives, providing the convenience of buying only one lubricant for both areas instead of having to buy two different original equipment manufacturer (OEM) lubricants. AMSOIL Synthetic ATV/UTV Powertrain Fluid’s exclusive formulation delivers the confidence to let you safely push your machine to the limit. It delivers confidence that your machine is protected in the toughest conditions, even if you have modified your ATV or UTV with a plow, winch, door panels and other accessories that increase weight and severity of service. In addition, it’s Warranty Secure™ and will not void your ATV or UTV warranty.
AMSOIL Synthetic Dirt Bike Transmission Fluid
Designed to Improve the Performance of Bike and Rider.
Grabbing the holeshot in a race or maneuvering around obstacles on the trail requires a transmission fluid that doesn’t slip or grab. AMSOIL Synthetic Dirt Bike Transmission Fluid is specifically formulated to provide consistent clutch feel, delivering riders confidence their clutch will respond the way they want. It also guards against gear and clutch wear so enthusiasts can spend more time riding and less performing maintenance. AMSOIL INC., the premier manufacturer of synthetic motorcycle lubricants, focuses on improving lubricant performance so riders can focus on improving their performance on the trail or the track. That’s why AMSOIL is the Official Oil of Monster Energy Supercross, AMSOIL Arenacross, AMSOIL GNCC and the AMA Amateur Nationals.
AMSOIL Engine and Transmission Flush
AMSOIL Engine and Transmission Flush helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Unlike many flush products, AMSOIL Engine and Transmission Flush features a multi-use formulation that dissolves and disperses sludge, varnish and deposits in both engines and automatic transmissions. Due to its detergent-based formulation, it can be easily disposed of with waste oil, making it more user-friendly. Its advanced formula of light base oil technology, powerful detergents and dispersants provides safe cleaning action. AMSOIL Engine and Transmission Flush is compatible with both petroleum and synthetic oils, preparing poorly maintained equipment for installation of new oil. It represents the first step toward restoring neglected equipment to top-notch performance. Though it works in one treatment, AMSOIL Engine and Transmission Flush can be used at every oil change.