AMSOIL Synthetic Oils and Filters for Marine and Watersports

Extend AMSOIL’s Protection, Performance and Peace of Mind to the Water

Whatever Marine Application You Have, AMSOIL Has the Edge For You On the Water

  • Performance
  • Power
  • Protection

 

 AMSOIL and Rinker Team Wins Champ Boat Series AMSOIL Synthetic Lubricants Protects Your Expensive Marine InvestmentAMSOIL Synthetic 2-Cycle and 4-Cycle Oils Are Best for High Performance Jetskis

In 1973, AMSOIL formulated and introduced the world’s first synthetic 2-cycle oil recommended at the mix ratio of 100:1 for any two-cycle application. Since then, AMSOIL’s core competencies in 2- and 4-cycle formulation have created benchmark synthetic lubricants that no other company can match. This industry-leading philosophy and technology extends to AMSOIL’s Synthetic Two- and Four-Cycle Marine Oils, synthetic greases, synthetic marine gear lube, and specialty products for your marine application.

ShowImage4

Regardless of the application you are looking for, whether it is for a high performance ski-boat, bass boat, offshore race boat, or for an auxiliary engine on a sailboat, AMSOIL has a designed product that is engineered specifically for your application. AMSOIL has two high performance synthetic NMMA-approved 4-cycle Marine Engine Oils and several synthetic 2-cycle oils designed for specific applications, including jetskis, EFI and DFI outboard motors, and racing applications.ShowImage6

AMSOIL Synthetic SAE 15W-40 Heavy Duty Diesel and Marine Oil continues to be one of the most popular marine engine oils for heavy duty diesel marine applications.

ShowImage5AMSOIL also provides the filtration for many of the 4-cycle marine applications, including Donaldson® Endurance™ oil and air filters for heavy-duty applications

In addition to complete coverage of 2-cycle and 4-cycle marine engine applications, AMSOIL’s full line of high performance synthetic lubricants “cover the waterfront” with synthetic greases, gear lubes, gasoline and diesel fuel additives, and specialty fluids and products.

Following is a detailed chart illustrating the optimum recommendations for specific applications for 2-cycle applications. While almost any AMSOIL Synthetic Two-Cycle Product can be used in an application, AMSOIL has designed and optimized products for specific operating parameters, based upon performance demands and operating temperatures. For example, a two-cycle racing application has different operating parameters and demands than an EFI or DFI outboard motor. Using the recommended AMSOIL Synthetic 2-Cycle product will result in optimum performance for your application:

 2cyclechart

Synthetic Pre-Mix and Injector Oils

AMSOIL HP Marine Synthetic High Performance 2-Cycle Engine Oil

AMSOIL HP Marine is excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil). Helps prevent deposits, protects against wear, has low smoke, protects against rust and has low aquatic toxicity. Superior performance as an injection oil or at 50:1 pre-mix. HP Marine inhibits ring deposits that can cause ring sticking and ring jacking (carbon build-up behind the ring, forcing it outward), a phenomenon that occurs in modern DFI outboard motors. It vitually eliminates exhaust port deposits for reliable, efficient operation. Use HP Marine™ in two-stroke marine applications that specify TC-W3, including those made by: Johnson/Evinrude*, FICHT*, E-TEC*, Mercury* EFI & Optimax*, Yamaha*, Nissan*, Tohatsu* TLDI*, Suzuki*, Mariner*, Force*. Use as injection oil or 50:1 premix (2.6 oz. per U.S. gallon of gas).

Product Code: HPM

AMSOIL Dominator Synthetic 2-Cycle Racing Oil

AMSOIL Dominator™ Synthetic 2-Cycle Racing Oil, an AMSOIL exclusive formulation, lubricates and protects high performance two-cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors: they need an optimized oil for peak performance. AMSOIL Dominator™ Synthetic 2-Cycle Racing Oil is engineered for racing. It contains a robust formulation specially engineered for unsurpassed protection and has the right film strength and clean burning properties for “on the edge” operation. AMSOIL Dominator™ Synthetic 2-Cycle Racing Oil reduces friction and protects pistons and bearings subjected to the rigors of racing, and contains the right additives for clean motor operation. JASO FC, API TC.

Product Code: TDR

AMSOIL Interceptor Synthetic High Performance 2-Cycle Oil

AMSOIL INTERCEPTOR™ Synthetic High Performance 2-Cycle Oil is a specialized oil for today’s specialized engines formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication. The backbone of AMSOIL INTERCEPTOR™ Synthetic High Performance 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a “double treat” additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics, and contains high levels of detergent additives to prevent valve sticking. Replaces manufacturer-branded oils. Injector use or 50:1 premix. Excellent in snowmobiles, motorcycles, PWC, ATVs and jet boats.

Product Code: AIT

AMSOIL Outboard 100:1 Pre-Mix Synthetic 2-Stroke Oil

AMSOIL Saber™ Outboard Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Optimized for water-cooled outboard motors, Saber™ Outboard contains lower temperature dispersants. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios with this premium synthetic formulation. AMSOIL Saber™ Outboard Synthetic Pre-Mix 2-Cycle Oil is formulated with exclusive AMSOIL synthetic base oils and premium additives, and has excellent lubricity and cleanliness properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973. TC-W3, API TC

Product Code: ATO

Formula 4-Stroke® Synthetic Motor Oils

Four-stroke gasoline engines have long been a mainstay of the general marine industry. They have succeeded in reducing emissions and increasing fuel efficiency, and they have also been a hit with consumers. When four-NMMA Approved FC-W Catalyst Compatiblestroke outboard motors were introduced to the market, manufacturers recommended either their own specially formulated oil or an API SG or SL automotive oil. However, because the specific lubrication requirements of automobiles and outboard motors are different, it soon became apparent that four-stroke outboard motors would require their own oil specification. This standard, entitled FC-W, was released by the National Marine Manufacturers Association (NMMA) in August 2004.

AMSOIL Synthetic Marine Engine Oils are certified by the National Marine Manufacturers Association (NMMA) for use in four-stroke outboard motors. They are also designed for use in 4-stroke marine inboard engines, and excellent for personal watercraft.

These high-quality oils demonstrate outstanding performance and meet the NMMA FC-W Catalyst Compatible specification requirements:

Product Code WCT: NMMA Registration #FC-00358P 10W-30 FC-W (CAT)®
Product Code WCF: NMMA Registration #FC-00850T 10W-40 FC-W (CAT)®
Product Code WCM: NMMA Registration #FC-11825T 25W-40 FC-W (CAT)®

AMSOIL SAE 10W-30 Synthetic Marine Motor Oil

AMSOIL SAE 10W-30 Synthetic Marine Engine Oil is a premium quality synthetic formulation engineered for the harsh operating conditions of marine environments. It withstands the intense mechanical activity of continuous, high RPM operation to deliver superior viscosity protection. AMSOIL Synthetic Marine Engine Oil is specially fortified with a heavy treatment of advanced additives that protect motors against wear, rust and deposits, and excels in both high horsepower applications and all-day trolling conditions. AMSOIL Synthetic Marine Engine Oil is recommended for gasoline-fueled four-stroke outboard, inboard, inboard/outboard (I/O) and personal watercraft motors. Use the appropriate viscosity grade where specified in the following: Honda®, Mercury®, Yamaha®, Johnson®/Evinrude®, Bombardier/BRP®, Suzuki®, Nissan®, Tohatsu®, OMC®, Volvo Penta®, Mercruiser®, Chevrolet®, Ford®.  Note: AMSOIL Formula 4-Stroke Marine Synthetic 10W-30 is recommended for use in place of 5W-30 as specified by Honda®. NMMA Registration: 10W-30 – FC-W (CAT)® Registration Number: FC-00833T

Product Code: WCT

AMSOIL SAE 10W-40 Synthetic Marine Motor Oil

AMSOIL SAE 10W-40 Synthetic Marine Engine Oil is a premium quality synthetic formulation engineered for the harsh operating conditions of marine environments. It withstands the intense mechanical activity of continuous, high RPM operation to deliver superior viscosity protection. AMSOIL SAE 10W-40 Synthetic Marine Engine Oil is specially fortified with a heavy treatment of advanced additives that protect motors against wear, rust and deposits, and excels in both high horsepower applications and all-day trolling conditions. AMSOIL Synthetic Marine Engine Oil is recommended for gasoline-fueled four-stroke outboard, inboard, inboard/outboard (I/O) and personal watercraft motors. Use the appropriate viscosity grade where specified in the following: Honda®, Mercury®, Yamaha®, Johnson®/Evinrude®, Bombardier/BRP®, Suzuki®, Nissan®, Tohatsu®, OMC®, Volvo Penta®, Mercruiser®, Chevrolet®, Ford®.  AMSOIL SAE 10W-40 Synthetic Marine Engine Oil fulfills the warranty requirements of four-stroke outboard motor manufacturers: NMMA Registration #FC-00850T covers the 10W-40.

Product Code: WCF

Synthetic Blend Marine Engine Oil

AMSOIL SAE 25W-40 Synthetic Blend Marine Engine Oil

Engine performance and reliability are key to a successful day fishing or boating. High-rpm operation and constant exposure to water, however, invite engine wear and formation of rust and corrosion, reducing engine performance and life. AMSOIL 25W-40 Synthetic Blend Marine Engine Oil guards against wear while delivering excellent protection against rust and corrosion. AMSOIL 25W-40 Synthetic Blend Marine Engine Oil is Warranty Secure®, keeping your factory warranty intact. Use in gasoline-fueled four-stroke inboards, outboards, inboard/outboards and personal watercraft that require any of the specifications listed below, including those made by Mercury* and Mercruiser*:
  • API SM
  • NMMA FC-W Catalyst Compatible

It is the high-performance upgrade for these manufacturer-branded products.

Product Code: WCM

Synthetic Engine Oils

AMSOIL Dominator Synthetic 15W-50 Racing Oil

AMSOIL Dominator® Synthetic 15W-50 Racing Oil (RD50) provides superior performance and maximum protection in high-performance and racing applications. Formulated to withstand the elevated RPM, high temperatures and shock-loading common to racing applications, Dominator Synthetic 15W-50 Racing Oil delivers superior performance and maximum protection in extreme conditions. Dominator Synthetic 15W-50 Racing Oil provides straight-grade protection in a multi-grade formulation, and features an additive package heavily fortified with zinc and phosphorus for superior long-term wear protection. Designed for maximum durability, it ensures critical engine components are protected for the duration of the race. Protection from start-up to the checkered flag!

Product Code: RD50

AMSOIL Synthetic Premium Protection SAE 20W-50 Motor Oil

AMSOIL Premium Protection Synthetic Motor Oil is formulated to provide superior protection and performance in a wide variety of demanding applications. Its unique combination of synthetic base oils and a superior additive package results in a formulation that exceeds the requirements of most gasoline or diesel applications that call for a 20W-50 motor oil. Premium Protection Synthetic Motor Oil is ideal for high-mileage vehicles and high-stress vehicles subject to hot temperatures, heavy hauling, trailer pulling or off-road use. It provides the extra anti-wear protection required by engines with flat-tappet cams and high-tension valve springs. AMSOIL Premium Protection Synthetic Motor Oil offers flexibility and performance beyond conventional oils.

Product Code: ARO

AMSOIL SAE 15W-40 Synthetic Heavy Duty Diesel and Marine Oil

AMSOIL SAE 15W-40 Synthetic Heavy Duty Diesel and Marine oil is the ultimate in diesel engine protection for pre-2007 emission diesel engines as well as all model year diesel engines in off-road applications. Its specially blended long-life formulation resists oxidation, thermal breakdown, retains viscosity and eliminates sludge and varnish formation. AMSOIL SAE 15W-40 Synthetic Heavy Duty Diesel and Marine Oil’s 12+ TBN chemistry neutralizes acids and controls soot thickening from EGR and blow-by to protect against corrosion, cylinder bore polishing (wear) and varnish and sludge deposits.

Product Code: AME

Synthetic Marine Gear Lube

AMSOIL Synthetic Universal SAE 75W/80W-90 Marine Gear Lube

The high performance lubricant engineered to meet the demands of marine applications. AMSOIL Universal Synthetic SAE 75W/80W-90 Marine Gear Lube provides excellent gear and bearing protection even when contaminated with 10% water, provides reduced friction and wear, excellent rust and corrosion protection, long seal life, and superior foam prevention. It is extreme pressure (EP) additive fortified for superior protection of fast accelerating, high torque/horsepower engines, and protects against shock loading from cavitation of heavily loaded engines.

Product Code: AGM

Helpful Differential Change Tips:

  • Flush (drain) as much of the old fluid out as possible
  • Differential fluid capacity depends on ring gear and axle housing size
  • Do not over/under fill differential. This could mean a capacity difference of a quart or more and may cause over heating problems (See the owner’s manual for proper fill level)
  • AMSOIL gear oils are formulated with friction modifiers for limited slip differential applications. There is no need to add limited slip or additional additives
  • After changing the differential fluid, drive the vehicle in 7 or 8 figure eight turns, so new lubricant can work its way into the axle assembly (Important!)

ShowImage

AMSOIL Universal Hand Pump for Bottles

Fits AMSOIL quart bottles, 1-gallon containers and 2.5-gallon containers. Guarantees efficient, quick dispensing of AMSOIL gear oils, transmission fluids and any oil that may need to be pumped. Great for fluid fills in differentials, transmissions, transaxles, boat lower units and boat sterndrives.

Product Code: G2039

Synthetic Greases

AMSOIL DOMINATOR Synthetic Racing Grease

AMSOIL DOMINATOR Synthetic Racing Grease is especially formulated for high-speed/high-temperature performance. It is engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose. Because it effectively reduces friction, DOMINATOR Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.

Product Code: GRG

AMSOIL Synthetic Water Resistant Grease

Reformulated with calcium sulfonate complex thickeners to provide even better protection and performance. The new thickener allows AMSOIL Synthetic Water Resistant Grease to provide improved extreme-pressure properties, corrosion resistance, oxidation resistance, high-temperature stability and water resistance at the same price as the previous formulations. AMSOIL Synthetic Water Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, AMSOIL Water Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water washout and sprayoff resistance are outstanding for applications frequently exposed to water, mud, snow or ice, including ATVs, UTVs, snowmobiles and boat trailers. NLGI #2.

Product Code: GWR

AMSOIL White Lithium Spray Grease

AMSOIL White Lithium Spray Grease effectively reduces friction and wear, keeping components running clean and trouble-free for outstanding performance and long life. It applies quickly and evenly and is ideal for greasing hard-to-reach equipment, including hinges, springs and other common applications. AMSOIL White Lithium Spray Grease protects against wear and corrosion, and adheres to metal surfaces for long-lasting performance.

Product Code: GSPSC

Synthetic Transmission Fluids

AMSOIL Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid

AMSOIL Signature Series Multi-Vehicle Synthetic ATF is engineered to outperform conventional automatic transmission fluids and exceed the performance requirements of most North American, European and Asian vehicles. Transmissions in commercial vehicles, SUVs, trucks and vans – particularly those used for hauling or towing – are subjected to severe-service operation and increased heat. Elevated temperatures cause fluids to break down, allowing damaging metal-to-metal contact and the formation of sludge and deposits. The problem is worse in modern transmissions with more gears, clutch packs and narrow oil passages that require clean, high-quality fluid to achieve maximum performance and life. AMSOIL Signature Series Synthetic Automatic Transmission Fluid is specifically formulated to withstand the rigors of heavy towing, elevated temperatures and challenging terrain. It remains fluid in sub-zero temperatures and provides reserve protection during heavy use and even abuse.

Product Code: ATF

AMSOIL Super Shift® Synthetic Racing Transmission Fluid

AMSOIL Super Shift® Synthetic Racing Transmission Fluid resists extreme heat to virtually eliminate slippage and improve shift performance while protecting against wear, helping racers improve on the track and save money in the garage. For maximum success, racers need to be confident their transmission is going to shift smoothly and operate properly no matter how hard they push their vehicle. AMSOIL Super Shift® Synthetic Racing Transmission Fluid virtually eliminates slippage, promotes positive clutch engagement and improves overall shift performance, helping racers improve on elapsed times. Its unmatched transmission friction performance provides high holding capacity for maximum torque transfer and brake power, reduced wear and longer clutch plate life. Also recommended for applications where Type F fluid is specified.

Product Code: ART

AMSOIL Torque-Drive Synthetic Automatic Transmission Fluid

AMSOIL Torque-Drive Synthetic Automatic Transmission Fluid is engineered for outstanding performance in heavy-duty transmissions manufactured by Allison, Voith, ZF and other heavy-duty transmissions. It provides excellent protection in temperature extremes and ensures consistent, smooth clutch engagement over the life of the fluid. AMSOIL Torque-Drive is recommended for use in heavy-duty, on- and off-highway automatic transmissions for many applications, including Allison® TES 295, TES 389, C-4; Voith® 55.6336.XX; ZF® TE-ML 20C; GM Dexron® III; Ford Mercon®; Mercedes-Benz® 236.10. Examples of operations that benefit from using AMSOIL Torque-Drive include municipal or transit buses, motor coaches, garbage haulers, motor homes, delivery vans, emergency vehicles, school buses, dump trucks, utility vehicles, cement trucks, line haul trucks and tow trucks. AMSOIL Synthetic Torque-Drive™ Automatic Transmission Fluid is recommended as a direct replacement for TranSynd® Synthetic ATF in heavy duty, on and off highway automatic transmissions manufactured by Allison®.

Product Code: ATD

Gasoline and Diesel Fuel Additives

AMSOIL Quickshot

The premium fuel additive to thoroughly clean and restore peak performance in small engine and powersports equipment fuel systems. Degraded fuel presents a major maintenance issue in small engines and powersports equipment. AMSOIL Quickshot’s revolutionary technology focuses on three major fuel-related issues plaguing small engines and powersports equipment: ethanol, water and dirty pump gas. They can form varnish, gum and insoluble debris that clog carburetors, fuel injectors and fuel filters. Carbon buildup can form on the tops of pistons that leads to pre-ignition, rough idling and poor throttle response. Fuel-related problems are only expected to intensify in the coming years as the ethanol content in pump gasoline continues to increase. AMSOIL Quickshot also stabilizes fuel between uses and during short-term storage periods.

Product Code: AQS

AMSOIL P.i. Performance Improver Concentrate

Newly reformulated, AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability. AMSOIL P.i. maximizes fuel efficiency by dissolving and removing fuel system deposits and other contaminants for improved power and overall performance. AMSOIL P.i. also works as an “emissions passer.” It is ideal for use prior to emissions inspections. Treat gas, run that tank and fill up again prior to test. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10% ethanol blended gas. Tests results show improved fuel efficiency between 2.3% and 5.7%. One bottle treats 20 gallons of gas. Treat one full tank of gas every 4,000 miles or 100 hours of service to protect peak efficiency. Improves fuel mileage an average of 2.3% and up to 5.7%

Product Code: API

AMSOIL Gasoline Stabilizer

Fights fuel deterioration! Gasoline is not formulated for long-term storage and can start to degrade in as little as 60 days, leading to varnish and sludge deposits that clog injectors, fuel lines and carburetors, stick floats and cause poor engine performance, starting problems, increased maintenance expenses and decreased equipment life. AMSOIL Gasoline Stabilizer is suitable for gasoline or diesel fuel, and keeps fuel from deteriorating during storage allowing easier start-ups. It resists the formation of varnish and gum in fuel systems and storage tanks. Ideal for all two- and four-cycle engines, including motorcycles, snowmobiles, boats, ATVs, edgers, tillers, mowers, cars, trucks, snow blowers, chain saws, generators, farm and construction equipment. Mixes 1 oz. to 2.5 gallons of fuel.

Product Code: AST

AMSOIL Motorcycle Octane Boost

AMSOIL Motorcycle Octane Boost increases octane up to 3 Research Octane Numbers (RON) for power and efficiency. It is designed to improve startup performance and eliminate engine ping and knock for increased power at low-rpm operation. AMSOIL Motorcycle Octane Boost contains detergents that help combustion chambers and fuel delivery systems maintain cleanliness for optimum performance. At the recommended treat rate, it does not harm catalytic converters or oxygen sensors and is compatible with all other AMSOIL fuel additives. One 4 oz. bottle treats 4 to 6 gallons of gasoline.

Product Code: MOB

AMSOIL Dominator Octane Boost

Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use. Excellent as a lead substitute at same treat rates in collector automobiles, older off-road equipment and pleasure vehicles. Usual treat rate is one 12oz. bottle to 15 gallons of gasoline.

Product Code: AOB

AMSOIL Diesel Injector Clean

AMSOIL Diesel Injector Clean removes performance-robbing deposits from diesel fuel injectors to restore horsepower and improve fuel economy. It is formulated for all types of diesel engines, including high-pressure common-rail designs. Diesel Injector Clean is formulated to clean both the tough-to-remove internal diesel injector deposits surfacing in modern high-pressure common-rail diesel engines and traditional carbonaceous deposits. Unlike all-in-one fuel additives that may sacrifice performance in specific areas in the name of convenience, AMSOIL Diesel Injector Clean makes no sacrifices; it is purpose-built for diesel owners who demand maximum results. Ultra-low-sulfur diesel fuel (ULSD) has significantly reduced lubricity – a critical property in controlling wear in fuel pumps and injectors. AMSOIL Diesel Injector Clean adds back the lubricity the fuel pump and injectors need, improving service life and saving time and money on maintenance costs.

Product Code: ADF

AMSOIL Cetane Boost Diesel Fuel Additive

AMSOIL Diesel Cetane Boost raises the cetane number of diesel fuel up to seven points for maximum horsepower, increased fuel economy and easier starts in all diesel engines. Diesel engines operate best on fuel with cetane values of 50 or higher. Most diesel fuel sold in North America has a cetane value of 40-45. Unlike all-in-one fuel additives that may sacrifice performance in specific areas in the name of convenience, AMSOIL Diesel Cetane Boost makes no sacrifices; it is purpose-built for diesel owners who demand maximum results. Fuel with a higher cetane number provides for a more complete burn, resulting in improved performance. By increasing cetane, AMSOIL Diesel Cetane Boost improves the ignition quality of diesel fuel, maximizing available power and improving starting. It also smooths idle and reduces smoke and emissions.

Product Code: ACB

High Performance Specialty Fluids

AMSOIL Engine Fogging Oil

Two- and four-stroke recreational vehicles, hand held power equipment, small engines, construction and farm equipment are commonly operated seasonally or infrequently, then stored for long periods of time. During these periods of inactivity, and as a result of fluctuations in ambient temperatures, water vapor can form condensate within the engine. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is taken out of storage and dry started. AMSOIL Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean applications, while reaching more components and offering better distribution than straight motor oil. AMSOIL Fogging Oil protects all equipment during the off-season so it runs when you need it!

Product Code: FOG

AMSOIL Metal Protector MP AMP

AMSOIL Metal Protector is a synthetic, greaseless all-purpose lubricant that provides metal surfaces with a long-lasting film. It is versatile by being effective in applications as diverse as hardware, household appliances, sporting goods and electrical equipment. AMSOIL Metal Protector’s penetrating agents cut through rust and corrosion to allow free movement of parts. AMSOIL MP is the product of choice for drying electrical and ignition systems and protecting electrical equipment from freshwater and saltwater damage. AMSOIL MP Metal Protector is also the product of choice for protecting firearms and other fine componentry. It contains no silicone. AMSOIL MP is compatible with plastic, leather, fabric, fishing line and paint.

Product Code: AMP

AMSOIL Heavy Duty Metal Protector MPHD

AMSOIL Heavy Duty Metal Protector has been reformulated to provide improved performance as a corrosion inhibitor. MPHD is an easy to use spray-on product that effectively protects metal surfaces that are exposed to the damaging effects of salt, moisture or chemical corrosion. While still providing some lubricating properties, its primary focus is corrosion protection. It is the product of choice for metal surfaces that are exposed to the damaging effects of salt, moisture or chemical corrosion.  AMSOIL Heavy Duty Metal Protector is also excellent for undercoating car doors, wheelwells, rocker panels seams and other metal surfaces exposed to water, dirt or road salt.

Product Code: AMH

AMSOIL Silicone Spray

Get rid of squeaks! AMSOIL Silicone Spray can be used for lubricating non-metallic surfaces that come into contact with metal, nylon, cardboard, fiberglass, wood or plastic surfaces. Use it anywhere a light-duty or silicone lubricant is required such as on rubber gaskets and plastics to prevent squeaks in automotive applications. AMSOIL Silicone Spray protects with a dry lubricating film and helps prevent the cracking and drying of rubber. It displaces water and makes an excellent mold release lubricant. AMSOIL Silicone Spray is perfect for use on surfaces, which may be damaged by conventional lubricants such as grease or oil, since it consists of a special non-staining formula. It is excellent for waterproofing leather boots, shoes, jackets, and suede. It may be used where light duty or silicone lubricants are recommended.

Product Code: ALS

AMSOIL Miracle Wash Waterless Wash and Wax Spray

This unique dry car wash and polish delivers outstanding performance and quick, easy and economical spray application. No water required! Incredibly easy to use: simply spray on, use a clean terry cloth towel to spread Miracle Wash and wipe clean with a second terry cloth towel. It’s simply the fastest way to clean your vehicle. Specially formulated surfactants lift dirt and other particles from the surface of your car and hold them in suspension. Miracle Wash then acts as a shield, protecting the surface from abrasion while you wipe the dirt clean. Repels dust and light dirt particles and protects against the sun’s ultraviolet rays. Great for most nonpourous surfaces like countertops and musical instruments, too!

Product Code: AMW

AMSOIL Propylene Glycol Biodegradable Antifreeze and Engine Coolant

AMSOIL Antifreeze & Coolant is newly formulated to provide benefits far beyond those found in today’s conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifreeze and cooling protection in the most extreme temperatures and operating conditions. It can be used for seven years of 250,000 miles in passenger cars, light-duty trucks, vans and recreational vehicles. It lasts seven years or 750,000 miles in over-the-road diesel trucks. AMSOIL Antifreeze & Coolant is dyed neutral yellow and is compatible with all ethylene and propylene antifreeze and coolant formulations on the market, including DEX-Cool™®, Sierra™®, and Zerex™®. It is also compatible with fully formulated diesel antifreezes and other organic acid technology (OAT) and hybrid organic acid technology (HOAT) formulations.

Product Code: ANT

Full-Flow Oil Filtration

AMSOIL Ea® Oil Filters with Full-Synthetic Media

AMSOIL Ea® Oil Filters (EaO, Ea15K) have one of the best efficiency ratings in the automotive/light-truck market. Ea Oil Filters provide a filtering efficiency in accordance with industry standard ISO 4548-12 of 98.7 percent at 20 microns, while competitive filters demonstrate efficiencies as low as 51 percent. Their small synthetic fibers trap smaller particles and hold more contaminants, resulting in lower restriction decreasing engine wear. AMSOIL Ea Oil Filters have a greater capacity for small, wear-causing contaminants than competing filter lines. When used in conjunction with AMSOIL synthetic motor oils, AMSOIL Ea Oil Filters are guaranteed for up to 15,000 miles/one year, whichever comes first, or 25,000 miles/one year, whichever comes first, depending on application and severity of service.

AMSOIL Ea® Oil Filter Specifications

Product Code: EAO

AMSOIL Ea® Heavy-Duty Extended-Life Oil Filters

AMSOIL Ea® Heavy-Duty Extended-Life Oil Filters (EaHD) provide excellent filtering efficiency and high levels of contaminant capacity for heavy-duty on- and off-road gasoline and diesel applications. They provide extended service intervals that coincide with the maximum drain interval recommendations of AMSOIL synthetic motor oils (not to exceed one year), increasing convenience and reducing maintenance costs. Ea® Heavy-Duty Oil Filters have lower restriction than conventional cellulose media filters. Their small synthetic fibers trap smaller particles and hold more contaminants, while providing better flow than cellulose media. During cold-temperature warm-up periods, an Ea® Heavy-Duty Oil Filter allows the oil to flow through the filter more easily than a typical cellulose filter. Lower restriction helps circulate oil more quickly, promoting long engine life. Ea® Heavy-Duty filters offer AMSOIL quality at competitive prices.

Product Code: EaHD

AMSOIL Motorcycle and Power Sports Oil Filters with Full-Synthetic Media

Motorcycle and powersports enthusiasts want their equipment to run at peak performance and deliver years of satisfaction. Many have invested thousands of dollars and untold hours into acquiring and taking care of their machines. Dirt and other particles, however, can infiltrate the engine and cause wear. Over time, the engine can become less efficient, lose power and fail to deliver the “like-new” feeling enthusiasts desire when riding. AMSOIL Ea® Motorcycle Oil Filters (EaOM) incorporate the same synthetic media found in AMSOIL Ea Oil Filters (EaO/Ea15K) for auto/light-truck filters. Their excellent filtering efficiency maximizes wear protection, helping equipment run at peak efficiency and last longer. AMSOIL Ea Motorcycle Oil Filters are fluted for easy removal from the motorcycle and are available in a chrome-plated alternative to the normal black filters.

Product Code: EAOM

Bypass Oil Filtration

AMSOIL Marine Dual Remote Bypass Filtration System

The Marine Dual Remote Filtration System was created to address the specific severe operating environment of marine engines in both salt and fresh water. These torturous conditions place tremendous stress on engines and engine oils. AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (Beta 75) at TWO microns and 60 percent at one micron.Since clean engine oil is critical for ensuring proper operation and protection of expensive marine equipment, this system is recommended for marine gas and diesel engines with sump capacity up to 21 quarts depending upon size of EaBP Bypass Filter element used.

Product Code: BMK18

AMSOIL Single Remote Bypass Filter System

Engine compartments are becoming increasingly cramped, leaving little room for after-market additions and improvements. The AMSOIL Universal Single-Remote Bypass System solves that issue and provides superior bypass filtration performance while working in conjunction with the engine’s full-flow oil filter. This system connects to the engine through a pressurized oil port. System includes mount, mounting hardware, hose and hose fittings. Note: The EaBP bypass oil filter is sold separately. EaBP120 will not work with this system. AMSOIL EaBP Bypass Filters have an absolute efficiency of 98.7 percent (Beta 75) at TWO microns, and about 60% below 1 micron, thus virtually eliminating engine wear from particles.

Product Code: BMK21

AMSOIL Dual-Gard™ Bypass Filter System

The AMSOIL Dual-Gard Remote Bypass System provides superior filtration performance and is ideal for engines with sump capacities greater than 20 quarts. The DUAL-GARD system links two AMSOIL Bypass filters together on one mount. This system connects to the engine through a pressurized oil port. System includes mount, mounting hardware, hose and hose fittings. Note: The EaBP bypass oil filters are sold separately. The EaBP120 will not work with this system. This high performance unit consists of two (2) AMSOIL EaBP Absolute Efficiency Bypass Filters mounted on an A380 aluminum alloy mounting block. AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (Beta 75) at TWO microns, which means absolute efficiency at 2 microns. The AMSOIL Dual-Gard™ Bypass Oil Filtration System treats oil to ultrafine filtration, which increases engine and oil life and enhances engine performance for heavy duty diesel engines. Wear tests have shown particles of contamination in the sub-micron to 20 micron range are most harmful to rings and bearings. These filters remove 39% of soot contaminants less than one micron, virtually all contaminants 2 microns and larger, and are considered SRD’s (soot removal devices). For sump capacities of 20 to 42 quarts.

Product Code: BMK22

AMSOIL Heavy-Duty Bypass Filter System for Heavy Equipment

The AMSOIL Heavy-Duty Bypass Filtration System (BMK30 and EaBP120) offers maximum bypass filtration performance for heavy-duty on- and off-road applications while working in conjunction with the engine’s full-flow oil filter. This system connects to the engine through a pressurized oil port. System includes mount, mounting hardware, hose, hose fittings and the EaBP120 Bypass filter.The AMSOIL BMK30 bypass filter mount is made from high-quality cast aluminum with a steel filter spud that has been thoroughly tested in on-road and severe off-road service. It is finished with a thick layer of powdercoated paint to provide maximum resistance to the degrading effects of road salt, debris and engine compartment chemicals. In addition, AMSOIL Heavy-Duty Bypass Filtration Systems can be plumbed in a series to provide maximum filtration protection for large V12 and V16 engines. The AMSOIL BMK30 Heavy-Duty Bypass System and EaBP120 Ea Bypass Filter provide maximum filtration performance for virtually all heavy-duty diesel applications, including Class 6, 7 and 8 heavy-duty trucks, off-road equipment, buses, generators, marine engines, logging and agricultural equipment. AMSOIL recommends changing the EaBP120 every other full-flow filter change up to 120,000 miles, 1,800 hours or 1 year, whichever comes first. Extended oil drain intervals should always be accompanied by an oil analysis program.

Product Code: BMK30

AMSOIL Ea® Bypass Oil Filter

AMSOIL Ea Bypass Oil Filters provide maximum filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, AMSOIL Ea Bypass Filters operate by filtering oil on a “partial-flow” basis. They draw approximately 10 percent of the oil pump’s capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can’t remove. AMSOIL Ea Bypass Filters have an efficiency of 98.7 percent at two microns. At normal operating RPM, Ea Bypass Filters will filter all of the oil in a typical five-quart sump in less than 10 minutes. AMSOIL Ea Bypass Filters typically filter all of the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

Product Code: EABP

Premium Air Filtration

AMSOIL Ea®Universal Air Induction Filters

More cold air = more horsepower! AMSOIL offers universal air induction filters (EaAU) designed to replace stock oil wetted gauze or foam conical filters that were supplied with custom induction systems produced by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and others. AMSOIL Ea® Air Induction Filters fit most of the popular intake systems available. They provide improved cold air intake and a level of engine protection only an Ea® Filter can provide. EaAU Filters are made from high-quality synthetic nanofiber media. In lab testing, the nanofiber media found in EaAU Filters removed 5X more dust than the average cellulose filter and 50X more dust than the average wet-gauze media, delivering excellent protection against wear-causing contaminants entering the engine. And to clean them simply use low-pressure shop air or vacuum!

Product Code: EaAU

AMSOIL Ea® Racing Air Filters with Nanofiber Technology

AMSOIL custom EaAR filter assemblies are designed with the racer in mind. They incorporate good looks and excellent air flow, as well as the high efficiency customers expect from Ea technology. EaAR Air Filters are specially designed for racing and street rod enthusiasts who desire Ea protection in carbureted applications. AMSOIL EaAR filter kits provide racers with more power through the new Ea air flow lids. Not only does the Ea air flow lid add filter area, it actually redirects airflow inside the filter to pull in more air through the side pleats for even greater performance efficiency. Cleanable and reusable, the AMSOIL Ea air flow lid delivers the best protection available for engines, and it comes in a wide range of applications. The air flow lids feature a polished aluminum trim ring with AMSOIL logos etched in the surface. AMSOIL Pre-filters are available to extend service intervals.

Product Code: EaAR

AMSOIL Ea® Pre-Filters for Racing and Off-Road Air Filters

Racers and off-road enthusiasts subject their vehicles to some of the most severe conditions possible. These vehicles operate in areas of heavy dirt and mud that gets slung into every crack and corner, often clogging air filters. AMSOIL Ea Pre-Filters are designed to keep larger particles from getting into and clogging the pleats of air filters. When an air filter is clogged, the engine loses horsepower and, in the case of Ea Air Filters, the filter must be cleaned. There is no vacuum or compressed air available on the race track or out in the swamp, but an Ea Pre-Filter is easily removed and shaken free of debris in seconds. Ea Pre-Filters fit over the top of existing air filters. These polyester mesh bags feature an industrial grade elastic band at the opening to ensure the pre-filter does not slide off.

Product Code: EaPF

Synthetic Nanofiber Basics

EaANanofiber1
Nanofiber Filter Media Traps Sub-Micron Size Particles
on the Nanofiber Surface, Preventing Particles from
Lodging in the Filter Media Depth

PowerCore® Air Filters

AMSOIL Donaldson Power Core® Air Filters

AMSOIL offers premium air filters that utilize PowerCore® filtration technology for Ford 6.0L Diesel PowerStroke®, GM H2 Hummer 6.0L Vortec® and 2006 – 2008, GM 6.6L Duramax Diesel, selected Freightliner, and John Deere applications. The rugged structure of PowerCore® filters features an innovative, layered, fluted filter media, which allows air to enter an open flute while forcing it out an adjacent flute, allowing only clean air into the engine. Dirty air is effectively filtered and cleaned in only one pass through the media. Donaldson PowerCore® Air Filters are widely known in the heavy-duty market for being reliable, premium products. Their flawless reputation and proven performance make Donaldson filters a perfect match for AMSOIL.

Product Code: PCF

Donaldson® Endurance® and P-Series

Nanofiber Synthetic Media Gives Donaldson® Endurance™ Air and Oil Filters the Highest Efficiency Available for Heavy Equipment

ShowImage

Click for Product Information:
Donaldson® Endurance™ Air Filters
Donaldson® Endurance™ Oil Filters

Donaldson® Endurance™ Air and Oil Filters with Synthetic Nanofiber Media

Donaldson® Endurance™ air and oil filters, available through AMSOIL, provide the highest level of filtration efficiency in the industry for heavy equipment. Specifically designed for on-road, heavy-duty class 6, 7 and 8 vehicles,Donaldson® Endurance™ air and oil filters feature exclusive nanofiber technology. Class 6 vehicles, 19,501 to 26,000 pounds gross vehicle weight (GVW), include single-axle vans, beverage trucks and school buses; class 7, 26,001 to 3,000 pounds GVW, include refuse trucks, tow trucks and city transit buses; class 8 trucks, 33,000 pounds GVW and greater, include fuel haulers, inter-city/tour buses and cement trucks. Donaldson® Endurance™ synthetic air and oil filters and AMSOIL synthetic lubricants together deliver unrivaled protecion, longer engine life and reduces maintenance costs for on-highway trucks, vans and buses in classes 6.7 and 8 for fleets across the nation.

Product Code: ELF

Donaldson® Endurance™ Air Filters

Donaldson® Endurance™ air and oil filters, available through AMSOIL, provide the highest level of filtration efficiency in the industry for heavy equipment. Specifically designed for on-road, heavy-duty class 6, 7 and 8 vehicles,Donaldson® Endurance™ air and oil filters feature exclusive nanofiber technology. Class 6 vehicles, 19,501 to 26,000 pounds gross vehicle weight (GVW), include single-axle vans, beverage trucks and school buses; class 7, 26,001 to 3,000 pounds GVW, include refuse trucks, tow trucks and city transit buses; class 8 trucks, 33,000 pounds GVW and greater, include fuel haulers, inter-city/tour buses and cement trucks. Donaldson® Endurance™ synthetic air and oil filters and AMSOIL synthetic lubricants together deliver unrivaled protecion, longer engine life and reduces maintenance costs for on-highway trucks, vans and buses in classes 6.7 and 8 for fleets across the nation.

Product Code: EAF

Donaldson P-Series Lube, Air, Coolant, Fuel and Hydraulic Filters

Increased engine emissions control and tighter tolerances within the engine require high efficiency filters. Donaldson P-Series Lube Filters are constructed with full synthetic or synthetic blend media for high efficiency. Donaldson P-Series Air Filter media is made up of specially formulated fibers designed to trap contaminants such as dust, dirt and soot before they reach the engine. Donaldson has developed an extensive range of air filter media to provide the best engine protection no matter what the operating conditions. Using the same particle size contaminant, for every eight grams of dirt passed through a Luber-finer filter, the Donaldson filter passed only two grams. Donaldson Coolant Filters, Fuel Filters and Hydraulic Filters are also available from AMSOIL.

Product Code: PSERIES

WIX® Filters

WIX Filters

To complement the Ea line of filters, AMSOIL now offers WIX filters, allowing one-stop shopping for automotive customers. WIX is well-known around the world for its innovative filtration products for the automotive and light truck market. AMSOIL carries over 700 WIX air, oil, fuel, racing and transmission filters for automotive and light truck applications. This includes not only standard air and oil filters, but fuel, transmission, cabin air and filters specially designed for racing as well. Today WIX manufactures some of the best air, lube, cabin air, fuel crank case breather and transmission filtration products on the market. The company is also widely known for its support of NASCAR.

Product Code: WIX

Mann FIilters®

MANN-FILTER Oil, Air, Fuel and Cabin Air Filters

AMSOIL has added a new supplemental partner in filtration. MANN-FILTER, with its U.S. headquarters in Portage, Mich., is the world’s largest filter company and a worldwide leader in auto, light truck, heavy duty, motorcycle and off-road filtration products. MANN-FILTER specializes in European vehicles and provides AMSOIL customers a greater breadth of products for vehicles like Audi, BMW, Mercedes, Volkswagen, Porsche, Volvo and Jaguar. They also build select filters for Ford, GM and Chrysler.

Product Code: MANN