AMSOIL Synthetic Tractor Hydraulic/Transmission Oil SAE 5W-30June 5, 2015
AMSOIL Synthetic SAE 5W-40 Premium Diesel Oil CJ-4June 5, 2015
AMSOIL Synthetic Anti-Wear Hydraulic Oils AW Series
AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils protect hard-working hydraulic systems from the stress of high-pressure, high-load and heavy-duty operations. They remain fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment. AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils are shear-stable, long-life hydraulic lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Series Oils contain a very effective zinc-based antiwear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils meet the requirements for Maximum Efficiency Hydraulic Fluid (mehf) and can lower costs and/or increase productivity in mobile equipment by 6 to 15%. Available in ISO 15, 22, 32, 46 and 68.
Synthetic Anti-Wear Hydraulic Oil – ISO 22
Protects hard-working hydraulic systems from the stress of high-pressure, high-load and heavy-duty operations. Remains fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment.
Package sizes include:
- 5-Gallon Pail
- 30-Gallon Drum
- 55-Gallon Drum
AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to help prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Oils contain a very effective zinc-based anti-wear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. Improved pump efficiency can increase hydraulic power, reduce fuel consumption and improve productivity. AW Oils are designed for long life and can typically reduce maintenance costs by extending drain intervals and reducing labor costs, repairs and downtime.
AMSOIL Synthetic Base Oil Technology
AMSOIL synthetic base oils resist thermal and oxidative breakdown, reducing varnish deposits. The very high viscosity indices, low pour points and lack of paraffins (wax) make these good all-season lubricants well-suited for high and low temperature extremes. At high temperatures and pressures, AMSOIL AW Series Oils provide a good lubricating film and protect components against wear. During cold-temperature operation, equipment starts easier and the need for preheating with sump heaters is reduced. The AW Series base oils also readily separate from water, preventing oil/water emulsions that inhibit lubrication and allowing for longer lubricant life and easier water drainage from the sump.
- Antiwear protection for high-pressure systems
- Recommended for gear, vane and piston pumps
- Contain rust, oxidation and foam inhibitors
- Designed for extreme-temperature operation
- Hydrolytically stable and readily separate from water
The correct viscosity grades of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operations where temperature extremes are encountered.
AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils and most synthetic hydraulic oils*. For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.
* Not compatible with phosphate ester, silicone or water-based fluids.
AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:
- Denison HF-0, HF-1 and HF-2
- Vickers M-2950-S and I-286-S
- Cincinnati Milacron P-68, P-69 and P-70
- U.S. Steel 127
- Racine, variable volume vane pumps
- DIN 51524, Parts 2 and 3 HLP22-HLP46
- SEB 181222 HLP22-HLP68
- ASTM D-6158 HV
- AFNOR E 48-603*
- Ford M6C32
- GM LH-04-1, LH-06-1 and LH-15-1
- Lee Norse 100-1
- Jeffrey No. 87
- BF Goodrich 0152
- Commercial Hydraulics*
* Except for PM-500 series silver-containing pumps which require R&O additive systems.
AMSOIL PRODUCT AVAILABILITY
AMSOIL industrial lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special-order products based on customer requests and regional demands.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). USA and Canada (M)SDS are available upon request at 715-392-7101 or on the AMSOIL Website. Keep Out of Reach of Children.
TYPICAL TECHNICAL PROPERTIES
Synthetic AW Series
|ISO VG – ASTM D2422||22||32||46|
|VK 100°C cSt – ASTM D445||5.9||7.3||9.7|
|VK 40°C cSt – ASTM D445||20.7||32.0||48.0|
|Viscosity Index – ASTM D2270||256||205||192|
|SpGr – g/ml – ASTM D1298||0.8363||0.8408||0.8483|
|Density – lb/gal – ASTM D1298||6.964||7.001||7.063|
|Flash Point °C (°F) – ASTM D92||174 (345)||228 (442)||230 (446)|
|Fire Point °C (°F) – ASTM D92||188 (370)||248 (478)||254 (489)|
|Pour Point °C (°F) – ASTM D97||<-60 (<-76)||<-51 (<-60)||<-47 (<-53)|
|Four-Ball Wear Test – ASTM D4172B (40 kg, 1200 rpm, 75° C, 60 min.)||0.45||0.45||0.45|
|Copper Strip Corrosion Test – ASTM D130||1A||1A||1A|
|Foam – ASTM D892
Sequence I, II, III Test End
|Dielectric Strength – ASTM D877 Voltage, kV AC||43.6||46.20||45.40|
|Demulsibility – ASTM D1401 Oil/Water/Cuff (min)||40/40/0 (10)||40/40/0 (10)||40/40/0 (10)|
|Rust Test – ASTM D665 A & B
Fresh Water and Synthetic Sea Water
AWG Packaging Information
|Code||Package Size||Unit of Measure||Product|
|AWG05 (AWG05-EA)||5-Gallon Pail||Each||Synthetic Anti-Wear Hydraulic Oil (ISO 22)|
|AWG55 (AWG55-EA)||55-Gallon Drum||Each||Synthetic Anti-Wear Hydraulic Oil (ISO 22)|