AMSOIL Synthetic Lubricants and Filters for 4x4 and Offroad Applications
Print

 


The Most Rugged Synthetic Oil Available For Your Rugged 4x4 and Off-Road Vehicles

No vehicle endures more punishment than 4-wheel drives.

AMSOIL synthetic lubes and high tech filters deliver maximum power, outstanding fuel economy and the rugged protection 4-wheel drives need.

AMSOIL Protects 4x4`s and Offroad Equipment
AMSOIL Fuel Additives Provide Better Fuel Economy and Performance for Gas and Diesel Trucks
AMSOIL Protects 4x4`s and Offroad Vehicles
AMSOIL Provides The Best Protection For the Most Severe 4x4 Applications

 

Extensive periods of heavy throttle application, towing, even stop and go driving make engines run hot.

Clean all-temp protection -
AMSOIL synthetic motor oils not only run clean in high temperatures, they actually help hold down engine heat during high stress operations.

In cold temperatures, AMSOIL synthetic motor oils flow readily, providing dependable starting and quick post-startup protection.

Load protection -
Towing and travel over rough terrain put extra load on the engine. AMSOIL synthetic motor oils provide an extremely durable lubricating film, one that's tough to break no matter how heavy the load. A robust package of anti-wear additives insures protection against accelerated wear during high load operation.

*Read AMSOIL Technical Service Bulletin (TSB) Outlining Lubrication Requirements of Flat Tappet Camshaft Engines and Recommended AMSOIL Synthetic Motor Oils for Optimum Protection*


Power and fuel economy -

Super-smooth AMSOIL synthetic motor oils help engines put through more power than they do with other oils. That saves fuel and boosts power and performance.

AMSOIL SEVERE GEAR® Synthetic Extreme Pressure Gear Lubes (SAE 75W-90, 75W-110 & 75W-140)

 Specially formulated for severe duty applications, AMSOIL SEVERE GEAR® Synthetic Extreme Pressure Gear Lubes are

The extreme loads, pressures and temperatures experienced by modern vehicles place increased stress on gear lubricants that can lead to a serious condition known as Thermal Runaway. As temperatures in the differential climb upward, gear lubricants lose viscosity and load-carrying capacity. When extreme loads and pressures break the lubricant film, metal-to-metal contact and increased heat occur. This increased friction and heat, in turn, results in further viscosity loss, which further increases friction and heat. As heat spirals upward, viscosity spirals downward. Thermal Runaway is a vicious cycle that leads to irreparable equipment damage from extreme wear, and ultimately catastrophic gear and bearing failure.

excellent for vehicles that experience towing, hauling, steep hill driving, commercial use, racing, off-road use, rapid acceleration, stop and go driving and high ambient temperatures. AMSOIL SEVERE GEAR® Gear Lubes are formulated with increased levels of premium quality additives, allowing improved limited-slip and locking differential performance.

 

And with high viscosity indices, SEVERE GEAR® Gear Lubes provide an extra level of protection at high temperatures. Extra additives provide additional insurance against wear in case of a lubricant film breach. These additives provide an iron sulfide barrier coating that effectively prevents micro-welding that leads to heat and friction. This allows AMSOIL SEVERE GEAR© Gear Lubes to prevent thermal runaway, a phenomenon caused by a lubricant 's inability to control friction and increased heat under high-stress conditions. (Read AMSOIL TSB (Technical Service Bulletin) DT-2008-3-25. By preventing thermal runaway, AMSOIL SEVERE GEAR® Gear Lubes inhibit component damage and rapid lubricant degradation.

AMSOIL SEVERE GEAR® Synthetic SAE 75W-110 EP Gear Lube provides superior performance and replaces competitors' 75W-110, 75W-90 and 80W-90 gear oils. It delivers better viscosity protection than SEVERE GEAR® 75W-90 and better fuel efficiency than SEVERE GEAR® 75W-140.

NOTE: AMSOIL SEVERE GEAR® Synthetic Extreme Pressure (EP) Gear Lubes are formulated with a very robust EP additive package and, as a result, usually do not need the addition of any friction modifier additive, even if recommended by the manufacturer (OEM). If limited slip differential chatter still occurs, then add AMSOIL Slip-Lock® Friction Modifier Additive.

 

AMSOIL SYNTHETIC GREASES

AMSOIL greases provide superior protection and friction reduction under both normal and severe operating conditions. The AMSOIL greases can be counted on to remain in the places that they are needed and to provide stable overall lubrication in even the most severe, extreme pressure and wet service conditions. As a result, extended greasing intervals are the norm.
  • Greater Load Carrying Ability
  • Added Wear Protection
  • Broader Temperature Range Protection
  • Longer Service Life
  • Greater Storage Stability
  • ASTM Tests prove once again that AMSOIL greases are the best way to protect and prolong the life of all types of equipment, including industrial, racing, fleet, marine and off-road equipment



    AMSOIL SYNTHETIC TRANSMISSION FLUIDS


    AMSOIL provides high performance synthetic lubricants for both automatic and manual transmissions. Smoother shifting characteristics, cooler operation, and less drag (more horsepower to the ground!) are benefits received from all AMSOIL synthetic transmission fluid products. Whether you are pulling a large trailer, want more horsepower to the track for racers, extend the equipment life of expensive heavy equipment transmissions, or lower your operating costs, AMSOIL has the high performance synthetic transmission fluid for your application.

    While a manual transmission shifts gears by the command of its operator, an automatic transmission acts as an energy transfer media and shifts automatically based on a variety of variables, including speed and load. Making use of a hydraulic system, in addition to a network of gears and bearings, the lubrication requirements for an automatic transmission are slightly different than those of a manual transmission, requiring a lubricant of different characteristics. Because automatic transmissions are commonly subjected to extensive idling, frequent stops, cold temperature operation, sustained hot weather operation and trailer towing, it is important that they are protected by a high quality lubricant.

    AMSOIL's transmission fluids provide automatic transmissions with superior friction protection and performance over a wider temperature range than conventional automatic transmission fluids, avoiding breakdown and maintaining its viscosity in temperature extremes.

     

    AMSOIL Gasoline Engine Oils Banner 375px
    Summary AMSOIL Synthetic Engine Oils for Gasoline Applications
    Banner SPACER 1
    AMSOIL Synthetic Signature Series SAE 0W-20 Motor Oil ASM
    Summary

    AMSOIL Synthetic Signature Series SAE 0W-20 Motor Oil

    AMSOIL Signature Series Synthetic SAE 0W20 Motor Oil AMSOIL Synthetic Signature Series Motor Oil delivers extraordinary lubrication in all types of automotive gasoline engines. By combining industry-premier synthetic technology with AMSOIL premium additives, Signature Series Synthetic Motor Oil exceeds the higher performance demands of modern engines. AMSOIL combined the industry premier synthetic technology and additives into a light viscosity formulation that withstands high temperatures and delivers outstanding fuel economy and cold temperature performance. AMSOIL Synthetic Signature Series SAE 0W-20 Motor Oil replaces SAE 5W-20 and is recommended for extended drain intervals according to AMSOIL service interval guidelines, which is 25,000 miles or 1 year in most applications. AMSOIL Synthetic Signature Series SAE 0W-20 Motor Oil  delivers the best possible engine protection, cleanliness and performance over extended drain intervals, reducing vehicle maintenance and waste oil disposal costs, and is designed to maximize energy efficiency for improved fuel economy. AMSOIL Synthetic Signature Series SAE 0W-20 Motor Oil is a shear stable formulation with a high viscosity index, and also has a very low volatility rate, making it excellent at controlling volatility related oil consumption and emissions. And unlike conventional oils, AMSOIL Synthetic Signature Series SAE 0W-20 Motor Oil contains no wax.
    Product Code: ASM

    BUY IT NOW

    AMSOIL Signature Series Synthetic 0W-30 Motor Oil AZO
    Summary

    AMSOIL Synthetic Signature Series SAE 0W-30 Motor Oil

    AMSOIL Synthetic Signature Series SAE 0W30 Motor OilAMSOIL Signature Series SAE 0W-30 Synthetic Motor Oil is the industry benchmark in lubrication technology. Engineered with the world’s finest synthetic base oils and high performance additives, AMSOIL Signature Series 0W-30 is designed for those who demand the absolute best in motor oil performance. This new and exclusive extended drain formulation delivers superior engine protection and maximum fuel economy.  Personally endorsed by AMSOIL founder and president Al Amatuzio, each bottle bears his signature and describes how he developed the first API qualified synthetic motor oil, thereby launching the synthetic motor oil industry. AMSOIL Synthetic Signature Series SAE 0W-30 is a premium grade synthetic motor oil that exceeds the requirements of modern, high-performance engines and older engines, replacing other SAE 0W-30, 5W-30 and 10W-30 motor oils, and is recommended for extended drain intervals in normal service up to 25,000 miles or one year.
    Product Code: AZO

    BUY IT NOW

    AMSOIL Synthetic Signature Series SAE 5W-30 Motor Oil ASL
    Summary

    AMSOIL Synthetic Signature Series SAE 5W-30 Motor Oil

    AMSOIL Synthetic Signature Series SAE 530 Motor OilAMSOIL 100% Synthetic Signature Series SAE 5W-30 Motor Oil is designed to provide maximum benefits in gasoline-fueled engines. It exceeds the most demanding world-wide performance standards and exceeds warranty requirements for all domestic and imported passenger car engines, both turbo-charged and non-turbo-charged. AMSOIL Synthetic Signature Series SAE 5W-30 Motor Oil is engineered to outperform all conventional gasoline engine motor oils and reduces heat, friction and wear for maximum power, performance and fuel efficiency. It is a clean engine formula and resists high temperature break down that forms sludge and varnish. As a result, AMSOIL Synthetic Signature Series SAE 5W-30 Motor Oil lasts longer and offers better protection. It is also ideal for hot and cold climates, and recommended for all gasoline engines up to 25,000-mile or 1-year drain intervals. Recommended for GM dexos 1™ applications.
    Product Code: ASL

    BUY IT NOW

    AMSOIL Synthetic Signature Series SAE 10W-30 Motor Oil ATM
    Summary

    AMSOIL Synthetic Signature Series SAE 10W-30 Motor Oil

    AMSOIL Synthetic Signature Series SAE 10W30 Motor OilAMSOIL 100% Synthetic Signature Series SAE 10W-30 Motor Oil is designed to provide maximum benefits in gasoline-fueled engines. AMSOIL Synthetic Signature Series SAE 10W-30 Motor Oil resists high temperature degradation and flows freely in cold conditions for superior protection against engine wear. It also provides maximum power and improved fuel efficiency, and withstands the stress of higher horsepower, higher heat and complicated emission control systems. AMSOIL Synthetic Signature Series SAE 10W-30 Motor Oil delivers long-lasting performance and protection for up to 25,000-mile or 1-year drain intervals.
    Product Code: ATM

    BUY IT NOW

    AMSOIL Synthetic European Formula SAE 5W30 Motor Oil AEL
    Summary

    AMSOIL Synthetic European Car Formula SAE 5W-30 Motor Oil 

    AMSOIL European Car Formula 5W30 LowSAPSAMSOIL European Car Formula 5W-30 Low-SAPS Synthetic Motor Oil provides exceptional performance and protection for high-performance European vehicles. Its low-viscosity formulation maximizes fuel efficiency without compromising engine protection, while meeting strict European performance requirements for gasoline and direct-injection diesel engines calling for a 5W-30 oil. Formulated with low sulfated ash, phosphorus and sulfur (SAPS), AMSOIL European Car Formula 5W-30 Synthetic Motor Oil complies with modern emissions systems to provide optimum life and performance.
    Product Code: AEL

    BUY IT NOW

    AMSOIL Synthetic SAE 5W-40 European Formula Engine Oil AFL
    Summary

    AMSOIL Synthetic SAE 5W-40 European Car Formula Engine Oil

    AMSOIL European Car Formula 5W40 MidSAPSAMSOIL European Car Formula 5W-40 Mid-SAPS Synthetic Motor Oil is specially formulated for the lubrication needs of modern European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks, premium additives and a 5W-40 viscosity rating, AMSOIL European Car Formula 5W-40 Synthetic Motor Oil is highly versatile for multiple applications. Its mid sulfated ash, phosphorus and sulfur (SAPS) formulation provides excellent protection for emissions systems. AMSOIL European Car Formula Synthetic Motor Oil contains high-quality anti-wear additives and surpasses the tough ACEA oil specifications for high-temperature/highshear viscosity. It provides outstanding protection in high-rpm, hot-running engines and delivers dependable long-term performance for the extended drain intervals set by European automakers.
    Product Code: AFL

    BUY IT NOW

    AMSOIL Dominator Synthetic 5W-20 Racing Oil RD20
    Summary

    AMSOIL Dominator® Synthetic 5W-20 Racing Oil

    AMSOIL Dominator Synthetic 5W-20 Racing OilAMSOIL Dominator® Synthetic 5W-20 Racing Oil (RD20) provides superior performance and maximum protection in high-performance and racing applications. Its shear-stable formulation is engineered to provide maximum horsepower without sacrificing engine protection. Dominator Synthetic 5W-20 Racing Oil provides straight-grade protection in a multi-grade formulation. AMSOIL Dominator Synthetic Racing Oil features an additive package heavily fortified with zinc and phosphorus for superior long-term wear protection. Designed for maximum durability, it ensures critical engine components are protected for the duration of the race. The low-viscosity formulation and robust additive package of Dominator 5W-20 make it ideal for use as a high-strength qualifying oil. In addition, its light viscosity makes it ideal for high-performance tuner cars and sub-compact vehicles.
    Product Code: RD20

    BUY IT NOW

    AMSOIL Dominator Synthetic 10W-30 Racing Oil RD30
    Summary

    AMSOIL Dominator® Synthetic 10W-30 Racing Oil

    AMSOIL Dominator Synthetic 10W-30 Racing OilAMSOIL Dominator® Synthetic 10W-30 Racing Oil (RD30) provides superior performance and maximum protection in high-performance and racing applications. Formulated to withstand the elevated RPM, high temperatures and shock-loading common to racing applications, Dominator Synthetic 10W-30 Racing Oil delivers superior performance and maximum protection in extreme conditions. Its shear-stable formulation was engineered to provide maximum horsepower without sacrificing engine protection. Dominator Synthetic 10W-30 Racing Oil provides straight-grade protection in a multi-grade formulation. In addition, its high levels of zinc and phosphorus additives make it ideal for street rods, muscle cars and other vehicles with flat-tappet cams.
    Product Code: RD30

    BUY IT NOW

    AMSOIL Dominator Synthetic 15W-50 Racing Oil RD50
    Summary

    AMSOIL Dominator® Synthetic 15W-50 Racing Oil

    AMSOIL Dominator Synthetic 15W-50 Racing OilAMSOIL Dominator® Synthetic 15W-50 Racing Oil (RD50) provides superior performance and maximum protection in high-performance and racing applications. Formulated to withstand the elevated RPM, high temperatures and shock-loading common to racing applications, Dominator Synthetic 15W-50 Racing Oil delivers superior performance and maximum protection in extreme conditions. Dominator Synthetic 15W-50 Racing Oil provides straight-grade protection in a multi-grade formulation, and features an additive package heavily fortified with zinc and phosphorus for superior long-term wear protection. Designed for maximum durability, it ensures critical engine components are protected for the duration of the race. Protection from start-up to the checkered flag!
    Product Code: RD50

    BUY IT NOW

    AMSOIL Synthetic Super Heavy Weight SAE 60 Racing Oil AHR
    Summary

    AMSOIL Synthetic Super Heavy Weight SAE 60 Racing Oil

    AMSOIL Synthetic SAE 60 Super Heavy Weight Racing OilAMSOIL Synthetic Super Heavy Weight SAE 60 Racing Oil is designed for high horsepower racing engines, typically supercharged and alcohol-burning or nitro-fueled, and requiring a high viscosity oil to resist the thinning effects of fuel dilution. AMSOIL Synthetic Super Heavy Weight Racing Oil is formulated specifically for wear protection and friction reduction in the extreme service conditions of racing. It has been proven on-track to bring down high engine oil sump temperatures by 20 degrees F, which speaks directly to its ability to reduce friction, promote power and inhibit wear. AMSOIL Synthetic Super Heavy Weight SAE 60 Racing Oil contains no friction modifiers, meeting the frictional requirements of JASO MA and ISO-L-EMA; therefore, the combination of high viscosity, full additive system and wet-clutch compatibility make this oil an excellent candidate for use in air-cooled vintage and classic motorcycle engines such as the Harley-Davidson Knucklehead and Shovelhead models. 
    Product Code: AHR

    BUY IT NOW

    AMSOIL Synthetic Formula 4-Stroke 10W-30/SAE 30 Small Engine Oil
    Summary

    AMSOIL Synthetic Formula 4-Stroke® 10W-30/SAE 30 Small Engine Oil

    AMSOIL Synthetic 10W-30/SAE 30 Formula 4-Stroke Small Engine OilAMSOIL Synthetic Formula 4-Stroke® 10W-30/SAE 30 Small Engine Oil is a robust formulation designed for hot temperature, severe service operation of small engines where routine maintenance is often difficult or infrequent. It is formulated with premium synthetic base oils that exceed both 10W-30 multi-grade and SAE 30 straight-grade viscosity requirements. Unlike conventional SAE 30 motor oils, AMSOIL ASE has a naturally high viscosity index and does not contain paraffin (wax). It has a -38°F pour point and qualifies for SAE 10W, making it an “all season,” multigrade lubricant with a wide operating temperature range. As an SAE 30 weight motor oil, AMSOIL ASE provides outstanding protection for hot operating engines. Formula 4-Stroke® Small Engine Oil is a commercial grade lubricant that helps improve productivity and reduce maintenance costs through superior engine protection.

    Engine manufacturers include - Briggs & Stratton, Kohler, Honda, Tecumseh, Robin, Kawasaki, Onan, Kubota, Yanmar, Wisconsin, Power Train, Vanguard and Linemar.
    Product Code: ASE

    BUY IT NOW

    Product Banner Spacer 13
    AMSOIL Diesel Oil Banner Separator
    Summary AMSOIL Synthetic Diesel Engine Oils
    Banner SPACER 2
    AMSOIL Synthetic Series 3000 SAE 5W-30 Heavy Duty Diesel Oil HDD
    Summary

    AMSOIL Synthetic Series 3000 SAE 5W-30 Heavy Duty Diesel Oil

    AMSOIL Synthetic Series 3000 5W-30 Heavy Duty Diesel OilAMSOIL Synthetic Series 3000 SAE 5W-30 Heavy Duty Diesel Oil is a fuel efficient formula delivering extraordinary lubrication in both gasoline and diesel fleets. It is energy efficient for reduced fuel costs by minimizing "drag" associated with high viscosity oils, allowing the engine to operate more freely, maximizing power and fuel economy. Because of its unsurpassed protection against engine wear, its anti-wear performance outperforms SAE 40 diesel and gasoline oils. In addition, AMSOIL Synthetic Series 3000 SAE 5W-30 Heavy Duty Diesel Oil keeps soot particles suspended independently, preventing them from agglomerating to form larger, wear-causing particles. Viscosity increase is minimized, and soot related wear is controlled.
    Product Code: HDD

    BUY IT NOW 

    AMSOIL Synthetic 10W-30/SAE30 Heavy Duty Diesel Oil ACD
    Summary

    AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil

    AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil Formulated with premium synthetic base oils that exceed both 10W-30 multi-grade and SAE 30 straight-grade viscosity requirements for outstanding performance in modern and older diesel engines. Unlike conventional SAE 30 motor oils, AMSOIL ACD has a naturally high viscosity index and does not contain paraffin (wax). It has a -33° F pour point and qualifies for an SAE 10W, making it an "all season" multi-grade lubricant with a wide operating temperature range. ACD contains premium additives with a high 12 TBN to neutralize acids from blow-by, exhaust gas recirculation (EGR) and high sulfur diesel fuels, while protecting against damaging piston deposits, ring sticking and sludge.
    Product Code: ACD

    BUY IT NOW

    AMSOIL Synthetic SAE 5W-40 European Formula Motor Oil AFL1
    Summary

    AMSOIL Synthetic SAE 5W-40 European Car Formula Engine Oil

    AMSOIL European Car Formula 5W40 MidSAPSAMSOIL European Car Formula 5W-40 Mid-SAPS Synthetic Motor Oil is specially formulated for the lubrication needs of modern European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks, premium additives and a 5W-40 viscosity rating, AMSOIL European Car Formula 5W-40 Synthetic Motor Oil is highly versatile for multiple applications. Its mid sulfated ash, phosphorus and sulfur (SAPS) formulation provides excellent protection for emissions systems. AMSOIL European Car Formula Synthetic Motor Oil contains high-quality anti-wear additives and surpasses the tough ACEA oil specifications for high-temperature/highshear viscosity. It provides outstanding protection in high-rpm, hot-running engines and delivers dependable long-term performance for the extended drain intervals set by European automakers.
    Product Code: AFL

    BUY IT NOW

    AMSOIL Synthetic European Car Formula 5W30 Motor Oil AEL 2
    Summary

    AMSOIL Synthetic European Car Formula SAE 5W-30 Motor Oil 

    AMSOIL European Car Formula 5W30 LowSAPSAMSOIL European Car Formula 5W-30 Low-SAPS Synthetic Motor Oil provides exceptional performance and protection for high-performance European vehicles. Its low-viscosity formulation maximizes fuel efficiency without compromising engine protection, while meeting strict European performance requirements for gasoline and direct-injection diesel engines calling for a 5W-30 oil. Formulated with low sulfated ash, phosphorus and sulfur (SAPS), AMSOIL European Car Formula 5W-30 Synthetic Motor Oil complies with modern emissions systems to provide optimum life and performance.
    Product Code: AEL

    BUY IT NOW

    AMSOIL Synthetic SAE 5W-40 Premium Diesel Oil CJ-4 DEO
    Summary

    AMSOIL Premium API CJ-4 Synthetic SAE 5W-40 Diesel Oil

    AMSOIL Premium Synthetic SAE 5W40 Diesel Oil CJ-4AMSOIL Synthetic 5W-40 Diesel Oil is the premium choice for API CJ-4 emission-quality diesel oil required by model-year 2007 and newer diesel engines. It delivers extraordinary lubrication in diesel engines found in commercial, fleet and personal vehicles. Built with the latest additive and synthetic base oil technology, AMSOIL Premium Synthetic 5W-40 Diesel Oil exceeds the higher performance demands of modern engines. It withstands the stress of heat, soot and acids to help prevent deposits, wear and corrosion. AMSOIL Synthetic 5W-40 is wax-free with a broad viscosity range to provide exceptional cold-weather starting and high temperature protection. It resists breakdown and offers maximum fuel efficiency over extended drain intervals: up to three times (3X) OEM recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes first, for diesel engines; up to two times (2X) OEM recommendation, not to exceed 15,000 miles or one year, whichever comes first, for gasoline engines. Drain intervals may be extended further with oil analysis.
    Product Code: DEO

    BUY IT NOW

    AMSOIL Premium API CJ-4 Synthetic SAE 15W-40 Diesel Oil DME
    Summary

    AMSOIL Premium API CJ-4 Synthetic SAE 15W-40 Diesel Oil

    AMSOIL Premium Synthetic SAE 15W40 Diesel Oil CJ-4Superior Shear Stability and Extended Drain Intervals in Ultra-Low Emission Diesel Engines. AMSOIL Synthetic 15W-40 Diesel Oil is the premium choice for API CJ-4 emission-quality diesel oil required by model-year 2007 and newer diesel engines. Built with the latest additive and synthetic base oil technology, AMSOIL Premium Synthetic SAE 15W-40 Diesel Oil exceeds the higher performance demands of modern engines. It withstands the stress of heat, soot and acids to help prevent deposits, corrosion and wear. Extended drain interval recommendations: three times (3X) OEM recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes first for diesel engines; two times (2X) OEM recommendation, not to exceed 15,000 miles or one year, whichever comes first, for gasoline engines. Drain intervals may be extended further with oil analysis.
    Product Code: DME
     

    BUY IT NOW

    AMSOIL Synthetic SAE 15W-40 Heavy Duty Diesel and Marine Oil AME
    Summary

    AMSOIL Synthetic SAE 15W-40 Heavy Duty Diesel and Marine Oil

    AMSOIL Synthetic SAE 15W-40 Heavy Duty Diesel and Marine Oil AMSOIL Synthetic SAE 15W-40 Heavy Duty Diesel and Marine oil is the ultimate in diesel engine protection for pre-2007 emission diesel engines. Its specially blended long-life formulation resists oxidation, thermal breakdown, retains viscosity and eliminates sludge and varnish formation. AMSOIL Synthetic SAE 15W-40 Heavy Duty Diesel and Marine Oil’s 12+ TBN chemistry neutralizes acids and controls soot thickening from EGR and blow-by to protect against corrosion, cylinder bore polishing (wear) and varnish and sludge deposits. Designed to deliver 1,000,000 miles in over the road trucks before engine overhaul.
    Product Code: AME

    BUY IT NOW

    Blank 3
    AMSOIL Premium Protection Oils Banner
    Summary AMSOIL Synthetic Premium Protection Engine Oils
    Banner SPACER 3
    AMSOIL Synthetic Premium Protection SAE 10W-40 Motor Oil AMO
    Summary

    AMSOIL Synthetic Premium Protection SAE 10W-40 Motor Oil

    AMSOIL Synthetic SAE 10W40 Premium Protection Motor OilAMSOIL Synthetic Premium Protection SAE 10W-40 Motor Oil is specially formulated to provide superior protection and performance in a wide variety of demanding applications including large and small gasoline or diesel engines in cars, motorcycles, trucks, motorhomes, maintenance equipment, heavy equipment, street rods and marine applications. It is ideal for high mileage vehicles and high-stress vehicles subject to hot temperatures, heavy hauling, trailer pulling or off-road use. It also provides the extra anti-wear protection required by engines with flat-tappet cams and high-tension valve springs. AMSOIL Synthetic Premium Protection SAE 10W-40 Motor Oil is also ideal for motorcycles, maintenance equipment and other wet clutch transmission applications.
    Product Code: AMO

    BUY IT NOW

    AMSOIL Synthetic Premium Protection SAE 20W-50 Motor Oil ARO
    Summary

    AMSOIL Synthetic Premium Protection SAE 20W-50 Motor Oil

    AMSOIL Synthetic SAE 20W50 Premium Protection Motor OilAMSOIL Synthetic Premium Protection SAE 20W-50 Motor Oil is designed to provide maximum benefits in gasoline and diesel engines. Formulated for use in both gasoline and diesel engines, this premium synthetic lubricant offers multi-functionality and excellent wear protection. Ideal for applications where the extra protection of a higher viscosity oil is desired. It is ideal for high mileage vehicles with flat-tappet cams and high-stress vehicles subject to hot temperatures, heavy hauling, trailer pulling or off road use. AMSOIL Premium Protection Oil resists oxidation, neutralizes acids, inhibits corrosion, reduces wear and protects against deposits. It provides the extra anti-wear protection required by engines with flat-tappet cams and high-tension valve springs. Product Code: ARO

    BUY IT NOW

    AMSOIL Gear Lube Banner Separator
    Summary AMSOIL Synthetic Gear Lubes
    Banner SPACER 4
    AMSOIL Severe Gear Synthetic SAE 75W-90 Extreme Pressure EP Gear Lube SVG
    Summary

    AMSOIL SEVERE GEAR® Synthetic SAE 75W-90 Extreme Pressure (EP) Gear Lube

    AMSOIL Synthetic Severe Gear SAE 75W-90 EP Gear LubeAMSOIL Severe Gear® Synthetic Extreme Pressure (EP) Lubricants are premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives; therefore, normally not needing any additional EP additives. AMSOIL Severe Gear© Synthetic Extreme Pressure (EP) Lubricants are formulated for the severe operating conditions of today’s pickup trucks, SUVs, heavy equipment and other hard working vehicles.
    Product Code: SVG

    BUY IT NOW

    AMSOIL Severe Gear Synthetic SAE 75W-110 Extreme Pressure EP Gear Lube SVT
    Summary

    AMSOIL SEVERE GEAR® Synthetic SAE 75W-110 Extreme Pressure (EP) Gear Lube

    AMSOIL Synthetic Severe Gear SAE 75W-110 EP Gear Lube AMSOIL SEVERE GEAR® 75W-110 fills the gap between the 75W-90 and 75W-140 viscosity gear lubes. This new viscosity grade, 75W-110, offers a high temperature film protection without compromising fuel economy while addressing performance and protection. Designed to provide superior protection for elevated operating temperatures without sacrificing fuel efficiency, it is formulated for use with limited slip clutches and is ideal for turbo diesel pickup trucks, vehicles used for towing and hauling and other vehicles subject to severe service operating conditions, including heavy equipment, construction vehicles, emergency vehicles, street rods and 4x4 vehicles.
    Product Code: SVT

    BUY IT NOW

    AMSOIL Severe Gear Synthetic SAE 75W-140 Extreme Pressure EP Gear Lube SVO
    Summary

    AMSOIL SEVERE GEAR® Synthetic SAE 75W-140 Extreme Pressure (EP) Gear Lube

    AMSOIL Synthetic Severe Gear SAE 75W-140 EP Gear LubeAMSOIL SEVERE GEAR® Synthetic SAE 75W-140 EP Gear Lube provides all the top performance of AMSOIL SEVERE GEAR® synthetic gear lubes for the heavier SAE 75W-140 viscosity recommended by many equipment manufacturers, especially those covering heavy-duty pickups and other high-stress equipment. This premium lubricant replaces competitors’ 75W-140, 80W-140 and 85W-140 gear oils. Use where maximum viscosity protection is needed for extreme severe-duty applications.
    Product Code: SVO

    BUY IT NOW

    AMSOIL Severe Gear Synthetic SAE 190 Off Road and Drag Racing Gear Lube SRN
    Summary

    AMSOIL SEVERE GEAR® Synthetic SAE 190 Off-Road and Drag Racing Gear Lube

    AMSOIL SEVERE GEAR Synthetic SAE 190 Off-Road and Drag Racing Gear LubeFormulated for severe racing conditions and other applications subject to extreme shock loading and pressures, AMSOIL SEVERE GEAR® Synthetic SAE 190 Gear Lubricant is a premium grade, extreme pressure gear lube engineered specifically for the demands of severe racing conditions. Its synthetic formulation provides improved flow over conventional oils, reducing viscous drag and power loss. AMSOIL proprietary extreme pressure additives form an iron-sulfide barrier coating on gear surfaces for the ultimate line of defense against wear, pitting and scoring. AMSOIL SEVERE GEAR® Synthetic SAE 190 Off-Road and Drag Racing Gear Lube protects protects gears from shock loading and tire shake, resists sling-off from G-forces and high speeds, clings to gears, promotes cooler operating temperatures, protects against rust and corrosion, and extends gear and bearing life.
    Product Code: SRN

    BUY IT NOW

    AMSOIL Severe Gear Synthetic SAE 250 Off Road and Drag Racing Gear Lube SRT
    Summary

    AMSOIL SEVERE GEAR® Synthetic SAE 250 Off-Road and Drag Racing Gear Lube

    AMSOIL SEVERE GEAR Synthetic SAE 250 Off-Road and Drag Racing Gear LubeFormulated for severe racing conditions and other applications subject to extreme shock loading and pressures. AMSOIL Severe Gear® Synthetic SAE 250 Gear Lubricant is a premium grade, extreme pressure gear lube  engineered specifically for the demands of the most severe racing conditions. It is formulated with shear stable, heavy synthetic base oils for “high film strength” and extra heavy treatments of additives. Its high performance synthetic formulation provides improved flow over conventional oils, reducing viscous drag and power loss. Severe Gear® SAE 250 Gear Lube provide a tough barrier cushion between metal surfaces that absorbs impact. AMSOIL proprietary extreme pressure additives form an iron-sulfide barrier coating on gear surfaces for the ultimate line of defense against wear, pitting and scoring.

    • Protects gears from shock loading and tire shake
    • Resists sling-off from G-forces and high speeds
    • Clings to gears - high pinion style and at steep angles
    • Promotes cooler operating temperatures
    • Protects against rust and corrosion
    • Extends gear and bearing life

    Product Code: SRT

    BUY IT NOW

    Service Tips for Changing to AMSOIL Gear Lube
    Summary

    Helpful Differential Change Tips:

  • Flush (drain) as much of the old fluid out as possible
  • Differential fluid capacity depends on ring gear and axle housing size
  • Do not over/under fill differential. This could mean a capacity difference of a quart or more and may cause over heating problems (See the owner’s manual for proper fill level)
  • AMSOIL gear oils are formulated with friction modifiers for limited slip differential applications. There is no need to add limited slip or additional additives
  • After changing the differential fluid, drive the vehicle in 7 or 8 figure eight turns, so new lubricant can work its way into the axle assembly (Important!)

      AMSOIL Gear Lube Pump Makes Changing Gear Lube Easier

      AMSOIL Universal Hand Pump for Bottles
      Fits AMSOIL quart bottles, 1-gallon containers and 2.5-gallon containers. Guarantees efficient, quick dispensing of AMSOIL gear oils, transmission fluids and any oil that may need to be pumped. Great for fluid fills in differentials, transmissions, transaxles, boat lower units and boat sterndrives.
      Product Code: G2039

      BUY IT NOW

    • AMSOIL Synthetic SAE 80W-90 Gear Lube AGL
      Summary

      AMSOIL Synthetic SAE 80W-90 Gear Lube

      AMSOIL Synthetic SAE 80W-90 EP Gear LubeProvides the long-lasting protection, fuel efficiency and dependability needed for top performance, even in extreme-pressure conditions. Stay fluid in cold temperatures for easy cold-weather shifting. Excellent for use in passenger cars and trucks requiring a GL-5 gear lube, including those with limited slip differentials. AMSOIL 80W-90 Synthetic Gear Lube is a multi-functional product designed to surpass the requirements of equipment and automotive applications calling for an SAE 80W-90 viscosity grade.
      Product Code: AGL

      BUY IT NOW 

      AMSOIL Slip-Lock Differential Additive ADA
      Summary

      AMSOIL Slip-Lock® EP Differential Additive

      AMSOIL Slip-Lock Extreme Pressure EP Differential AdditiveAMSOIL Slip-Lock® Differential Additive is formulated with advanced friction modifiers and is designed to eliminate gear-housing chatter in cars, trucks and SUVs equipped with limited-slip, positraction and locking differentials. It also reduces the banging and clunking associated with automatic locking differentials. For chattering differentials not running AMSOIL Gear Lube, this product is an excellent solution to the problem.
      Product Code: ADA

      BUY IT NOW

      AMSOIL ATF Banner 375px
      Summary AMSOIL Synthetic Transmission Fluid
      Banner SPACER 5
      AMSOIL Synthetic Low Viscosity Automatic Transmission Fluid ATL
      Summary

      AMSOIL Signature Series Fuel-Efficient Synthetic Automatic Transmission Fluid

      AMSOIL Signature Series FuelEfficient Synthetic Automatic Transmission Fluid ATLAMSOIL Signature Series Fuel-Efficient Synthetic Automatic Transmission Fluid is a fuel efficient automatic transmission fluid recommended for GM, Ford, Honda, Nissan and Toyota transmissions where lighter viscosity oil is required. The highly-specialized properties of this light-bodied fluid provide outstanding performance without compromising protection, even in severe operating conditions. Automatic transmissions have become increasingly complex as vehicle manufacturers strive to improve efficiency while satisfying consumer demands. Smaller, smoother-shifting transmissions with longer fluid life capabilities and heavier load capacities are now standard. Traditional ATFs, however, are unable to meet these extreme requirements, and new fluids have emerged with each new advancement in transmission engineering. AMSOIL, with its original introduction of a synthetic ATF in 1980, remains the leader in transmission fluid quality. AMSOIL Signature Series Fuel-Efficient Synthetic Automatic Transmission Fluid is formulated with the highest-quality components to exceed the most stringent industry standards.
      Product Code: ATL

      BUY NOW

      AMSOIL Synthetic Multi-Vehicle Automatic Transmission Fluid ATF
      Summary

      AMSOIL Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid

      AMSOIL Signature Series MultiVehicle Synthetic Transmission Fluid ATFTransmissions in commercial vehicles, SUVs, trucks and vans – particularly those used for hauling or towing – are subjected to severe-service operation and increased heat. Elevated temperatures cause fluids to break down, allowing damaging metal-to-metal contact and the formation of sludge and deposits. The problem is worse in modern transmissions with more gears, clutch packs and narrow oil passages that require clean, high-quality fluid to achieve maximum performance and life. AMSOIL Signature Series Synthetic Automatic Transmission Fluid is specifically formulated to withstand the rigors of heavy towing, elevated temperatures and challenging terrain. It remains fluid in sub-zero temperatures and provides reserve protection during heavy use and even abuse. AMSOIL Signature Series Multi-Vehicle Synthetic Transmission Fluid protects against thermal breakdown, provides outstanding wear protection, and delivers extraordinary cold-flow properties and smoother shifts.
      Product Code: ATF

      BUY IT NOW

      AMSOIL Synthetic Super Shift Racing Transmission Fluid ART
      Summary

       AMSOIL Synthetic Super Shift Racing Transmission Fluid

      AMSOIL Synthetic Super Shift Non-Slip Racing Transmission Fluid AMSOIL Synthetic Super Shift® Racing Transmission Fluid is specifically formulated for automatic transmissions operating in high-horsepower and high-torque conditions, and contains top-quality additives selected specifically for racing applications. Its unmatched transmission friction performance provides high holding capacity for maximum torque transfer and brake power, reduced wear and longer clutch plate life. AMSOIL Synthetic Supershift Racing Transmission Fluid virtually eliminates slippage, promotes positive clutch engagement and improves overall shift performance, helping racers improve on elapsed times. This high performance product delivers unmatched friction reduction and reduced wear so clutch plates and transmissions last longer, provides maximum torque transfer and brake power, and resists oxidation and thermal breakdown.
      Product Code: ART

      BUY IT NOW

      AMSOIL Synthetic Synchromesh SAE 5W-30 Transmission Fluid MTF
      Summary

      AMSOIL Synthetic Synchromesh SAE 5W-30 Transmission Fluid

      AMSOIL Synthetic SAE 5W-30 Manual Synchromesh Transmission OilAMSOIL Synthetic Synchromesh SAE 5W-30 Transmission Fluid meets and exceeds the gear, bearing, synchromesh and seal demands found in automobiles and light trucks. This specialized synthetic lubricant is specifically designed for manual transmissions and transaxles with synchromesh systems that require light viscosity, non-extreme pressure fortified oil. It is formulated with advanced additive technology to provide proper friction characteristics for smooth shifting without grinding or bump shifting, while providing the ultimate in gear and bearing protection. Replaces several OEM fluids including those from GM, Chrysler and Honda.
      Product Code: MTF

      BUY IT NOW

      AMSOIL Synthetic SAE 75W-90 Manual Transmission and Transaxle Gear Lube GL-4 MTG
      Summary

      AMSOIL Synthetic SAE 75W-90 Manual Transmission and Transaxle Gear Lube (GL-4)

      AMSOIL Synthetic SAE 75W-90 Manual Transmission and Transaxle Gear LubeAMSOIL Synthetic SAE 75W-90 Manual Transmission and Transaxle Gear Lube meets and exceeds the gear, bearing, synchromesh and seal demands found in automobiles and light trucks. This synthetic lubricant is designed to meet the special requirements of certain manual transmissions and transaxles, such as the New Venture NV4500.
      Product Code: MTG

      BUY IT NOW

      AMSOIL Synthetic Torque-Drive Automatic Transmission Fluid ATD
      Summary

      AMSOIL Synthetic Torque-Drive™ Automatic Transmission Fluid

      AMSOIL TorqueDrive Synthetic Automatic Transmission Fluid
      AMSOIL recommends Torque-Drive for use in heavy-duty, on- and off-highway automatic transmissions requiring any of the following specifications: Allison® TES 295, TES 389, C-4; Voith® 55.6336.XX; ZF® TE-ML 14C; GM Dexron® III; Ford Mercon®; Mercedes-Benz® 236.10. Examples of operations that benefit from using AMSOIL Torque-Drive include municipal or transit buses, motor coaches, garbage haulers, motor homes, delivery vans, emergency vehicles, school buses, dump trucks, utility vehicles, cement trucks, line haul trucks and tow trucks. AMSOIL Synthetic Torque-Drive™ Automatic Transmission Fluid is recommended as a direct replacement for TranSynd® Synthetic ATF in heavy duty, on and off highway automatic transmissions manufactured by Allison®.
      Product Code: ATD

      BUY IT NOW

      AMSOIL Synthetic Power Shift Transmission Fluids for Heavy Equipment
      Summary

      AMSOIL Synthetic PowerShift Transmission Fluids
      SAE 10W, 30 and 50
      AMSOIL Synthetic Powershift Transmission Fluid

      AMSOIL Synthetic Powershift Transmission Fluids are specifically designed for high-torque heavy-duty powershift transmissions. Formulated for extended drain intervals, Powershift Transmission Fluids contain top-quality synthetic base stocks and a high level of top-quality additives selected specifically for powershift transmissions. They offer unmatched transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life, and extend time between overhauls. Available in SAE 10W, 30 and 50 viscosities.
      Product Code: CTG, CTJ and CTL

      BUY IT NOW

      Product Spacer 3
      AMSOIL Grease Banner Separator
      Summary AMSOIL Synthetic High Performance Grease
      Banner SPACER 6
      AMSOIL DOMINATOR Synthetic Racing Grease GRG
      Summary

      AMSOIL DOMINATOR Synthetic Racing Grease

      AMSOIL Dominator Synthetic Racing Grease


      AMSOIL DOMINATOR Synthetic Racing Grease is especially formulated for high-speed/high-temperature performance.
      It is engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose. Because it effectively reduces friction, DOMINATOR Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.

      Product Code: GRG

      BUY IT NOW

      AMSOIL Synthetic Multi-Purpose Grease GLC
      Summary

      New!AMSOIL Synthetic Multi-Purpose Grease

      AMSOIL Synthetic MultiPurpose Grease
      Reformulated with calcium sulfonate complex thickeners to provide even better protection and performance. The new thickener allows AMSOIL Synthetic Multi-Purpose Grease to provide improved extreme-pressure properties, corrosion resistance, oxidation resistance, high-temperature stability and water resistance at the same price as the previous formulations. AMSOIL Synthetic Multi-Purpose Grease is qualified against the highest grease standards and designed for multiple-use applications. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, Multi-Purpose Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. It excels in temperature extremes by providing excellent oxidation stability, high-temperature dropping point and low-temperature torque value and pumping capability. AMSOIL Synthetic Multi-Purpose Grease is formulated with oil soluble extreme-pressure additives for heavy loads, as well as oxidation and corrosion inhibitors.
      Product Code: GLC

      BUY NOW

      AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease, NLGI #2 GPTR2CR
      Summary

      AMSOIL Synthetic Polymeric Truck, Chassis & Equipment Grease 

      AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease NLGI 2 AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease (NLGI #1 and NLGI #2) delivers excellent wear protection and extreme-pressure performance over extended service intervals in medium- and heavy-duty applications. It combines select base oils, proprietary synthetic polymeric chemistry, an advanced additive package and a lithium-complex thickener for excellent impact resistance, reliable contaminant control and maximum longevity. AMSOIL Truck, Chassis and Equipment Grease clings tenaciously to metal surfaces, helping to keep rain, snow and other corrosive contaminants from penetrating greasable components. It is formulated with an advanced additive package designed to combat the harmful effects of roadway contaminants, helping components last longer and saving fleets money. AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease is recommended for heavy-duty over-the-road tractors and trailers, delivery fleets, dump trucks, refuse haulers, utility fleets, emergency service vehicles, sewer and septic trucks, snow removal vehicles, wreckers, municipal service vehicles, equipment haulers, cement mixer trucks, airport support vehicles and more. In addition, its long service life reduces the need for frequent re-application (or requires less grease at each servicing), reducing maintenance costs.
      Product Code: GPTR1 and GPTR2

      BUY IT NOW

      AMSOIL Synthetic Polymeric Off-Road Grease NLGI #1 and #2 GPOR1
      Summary

      AMSOIL Hot News! AMSOIL Synthetic Polymeric Off-Road Grease NLGI #1 and #2, 5% Moly     

      AMSOIL Synthetic Polymeric Off-Road Grease NLGI 1 and NLGI 2 AMSOIL Synthetic Polymeric Off-Road Grease combines an over-based calcium-sulfonate complex thickener and proprietary synthetic polymeric technology to provide outstanding performance in heavy duty off-road applications. AMSOIL developed an exclusive synthetic polymeric system custom-built to provide performance benefits specific to off-road equipment. This synthetic technology helps give AMSOIL Off-Road Grease tenacious cling ability and maximum pound-out resistance over extended service intervals, even in wet environments. AMSOIL Synthetic Polymeric Off-Road Grease is heavily fortified with moly for maximum wear protection to meet Caterpillar’s requirement for pin and bushing applications. Its high Timken OK load and excellent four-ball wear and four-ball weld test results are proof of its exceptional load-bearing capacity. Field test results show that AMSOIL Synthetic Polymeric Off-Road Grease reduces grease consumption by up to 50 percent. That allows operators to either maintain their current maintenance schedule and use up to 50 percent less grease per application, or extend the length of time between re-greasings by up to 50 percent. Its superior pound-out resistance combined with extended service intervals and superior protection result in reduced lubricant, labor and equipment-replacement costs. Available in NLGI #1 and NLGI #2.
      Product Code: GPOR1, GPOR2

      BUY IT NOW

      AMSOIL White Lithium Spray Grease GSPSC
      Summary

      AMSOIL White Lithium Spray Grease

      AMSOIL White Lithium Spray Grease AMSOIL White Lithium Spray Grease effectively reduces friction and wear, keeping components running clean and trouble-free for outstanding performance and long life. It applies quickly and evenly and is ideal for greasing hard-to-reach equipment, including hinges, springs and other common applications. AMSOIL White Lithium Spray Grease protects against wear and corrosion, and adheres to metal surfaces for long-lasting performance.
      Product Code: GSPSC

      BUY IT NOW

      AMSOIL Synthetic Water Resistant Grease GWR
      Summary

      AMSOIL Synthetic Water Resistant Grease

      AMSOIL Synthetic Water Resistant Grease

      R
      eformulated with calcium sulfonate complex thickeners to provide even better protection and performance. The new thickener allows AMSOIL Synthetic Water Resistant Grease to provide improved extreme-pressure properties, corrosion resistance, oxidation resistance, high-temperature stability and water resistance at the same price as the previous formulations. AMSOIL Synthetic Water Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, AMSOIL Water Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water washout and sprayoff resistance are outstanding for applications frequently exposed to water, mud, snow or ice, including ATVs, UTVs, snowmobiles and boat trailers. NLGI #2.
      Product Code: GWR

      BUY NOW

      AMSOIL OIL FILTERS & SYSTEMS BANNER SEPARATOR
      Summary AMSOIL Ea Absolute Efficiency Oil Filters and Bypass Filtration Systems
      Banner SPACER 7
      AMSOIL Absolute Efficiency Oil Filters with Nanofiber Technology EaO
      Summary

      AMSOIL Ea Synthetic Oil Filters

      AMSOIL Absolute Efficiency EaO Oil Filters with Nanofiber Technology AMSOIL Ea® Oil Filters (EaO, Ea15K) have one of the best efficiency ratings in the automotive/light-truck market. Ea Oil Filters provide a filtering efficiency in accordance with industry standard ISO 4548-12 of 98.7 percent at 20 microns, while competitive filters demonstrate efficiencies as low as 51 percent. Their small synthetic fibers trap smaller particles and hold more contaminants, resulting in lower restriction. During cold-temperature warm-up periods, an Ea Oil Filter allows the oil to flow through the filter more easily than a typical cellulose filter does. Lower restriction decreases engine wear. AMSOIL Ea Oil Filters have a greater capacity for small, wear-causing contaminants than competing filter lines. When used in conjunction with AMSOIL synthetic motor oils, AMSOIL Ea Oil Filters are guaranteed for up to 15,000 miles/one year, whichever comes first, or 25,000 miles/one year, whichever comes first, depending on application and severity of service.
      Product Code: EaO and Ea15K

      BUY IT NOW

      AMSOIL Dual Remote Bypass Oil Filtration System Universal Mount BMK23
      Summary

      AMSOIL Dual Remote Bypass Oil Filtration System
       

      AMSOIL Universal Dual Remote Bypass Filtration System BMK23 Engineered for outstanding oil filtration efficiency, AMSOIL EaBP Bypass Filters have an absolute efficiency (Beta 75) at TWO microns and  60% efficiency at submicron levels. As a result, it is also an SMD (soot removal device). The AMSOIL Dual Remote Oil Filtration System remotely mounts both the full-flow filter and the bypass together on a machined aluminum high-tech mount. Working in conjunction with the AMSOIL EaO Absolute Efficiency Full Flow Oil Filter, which is rated at 15 microns absolute efficiency, the AMSOIL EaBP Bypass Filter operates by filtering oil on a "partial-flow" basis and provides the best possible filtration protection against wear, oil degradation, rust and corrosion.  It draws approximately ten percent of the oil at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL ByPass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil. It is like changing your oil approximately every 10 to15 minutes! This system will also increase oil sump capacity by one to three quarts.
      Product Code: BMK23

      BUY IT NOW

      AMSOIL Dual-Gard Bypass Filter System for Heavy Equipment
      Summary

      AMSOIL Dual-Gard™ Bypass Filter System

      AMSOIL Dual-Gard Bypass Filtration System for Heavy EquipmentThis high performance unit consists of two (2) AMSOIL EaBP Absolute Efficiency Bypass Filters mounted on an A380 aluminum alloy mounting block. AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (Beta 75) at TWO microns, which means absolute efficiency at 2 microns. The AMSOIL Dual-Gard™ By-Pass Oil Filtration System treats oil to ultrafine filtration, which increases engine and oil life and enhances engine performance for heavy duty diesel engines. Wear tests have shown particles of contamination in the sub-micron to 20 micron range are most harmful to rings and bearings. These filters remove 39% of soot contaminants less than one micron, virtually all contaminants 2 microns and larger, and are considered SRD’s (soot removal devices). For sump capacities of 15 to 42 quarts.
      Product Code: BMK22

      BUY IT NOW

      AMSOIL Single Spin-On Bypass Filter System BMK21
      Summary

      AMSOIL Single Spin-On Bypass Filter System

      AMSOIL Single Spin-On Bypass Filter System Engine compartments are becoming increasingly cramped, leaving little room for after-market additions and improvements. The BMK21 is a single remote by-pass filter system that fits into much smaller spaces than the AMSOIL Dual-Remote By-Pass Filtration System, but still offers the superb benefits AMSOIL By-Pass Filtration offers. AMSOIL EaBP Bypass Filters have an absolute efficiency of 98.7 percent (Beta 75) at TWO microns; therefore, AMSOIL Spin-On By-Pass Filters offer the ultimate in filtration technology. Engine wear is caused by dirt particles primarily between 5 and 20 microns, and these wear particles are filtered out by the AMSOIL EaBP By-Pass Oil Filter. Since AMSOIL EaBP By-Pass Oil Filters removes most particles less than 1 micron, they virtually eliminate engine wear. At normal operating RPMs, AMSOIL By-Pass Oil Filters filter all the oil in a five-quart sump in less than ten minutes, continually supplying your engine with analytically clean oil.  
      Product Code: BMK21

      BUY IT NOW

      AMSOIL Marine Dual Remote Bypass Filtration System
      Summary

      AMSOIL Marine Dual Remote Bypass Filtration System

      AMSOIL Marine By-Pass Filtration System BMK18The Marine Dual Remote Filtration System was created to address the specific severe operating environment of marine engines in both salt and fresh water. These torturous conditions place tremendous stress on engines and engine oils. AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (Beta 75) at TWO microns and 60 percent at one micron.Since clean engine oil is critical for ensuring proper operation and protection of expensive marine equipment, this system is recommended for marine gas and diesel engines with sump capacity up to 21 quarts depending upon size of EaBP Bypass Filter element used.
      Product Code: BMK18

      BUY IT NOW

      AMSOIL Aluminum Billet Oil Fill and Oil Filter Caps for Bypass Filters
      Summary

      Aluminum Billet Oil Fill and Oil Filter Caps For BMK21 Bypass Filtration System

      AMSOIL Machined Aluminum Fill and Filter Caps for AMSOIL Bypass Filtration System (BMK11)AMSOIL offers by-pass components to ease the installation of the BMK21 By-Pass Filtration System in three popular diesel engines: the Ford 6.0L Power Stroke™, the Dodge 5.9L Cummins and the General Motors 6.6L Duramax. Engine compartments are becoming increasingly cramped, and these high-tech machined aluminum parts facilitate installation of the BMK21 Single Ea Bypass Filter and mount.

      Ford 6.0L Power Stroke™ Diesels
      To ease installation of the BMK21 on 2003 and later model Ford pickups equipped with the 6.0L Power Stroke™ diesel engine, AMSOIL provides the Aluminum Billet Oil Filter Cap (BK1101), the Aluminum Billet Oil Fill Cap (BK1102) and the 90-degree JIC Elbow (BP242). These new high-quality billet aluminum caps replace the original equipment manufacturer (OEM) filter cap and oil fill cap. The new caps have holes tapped in them that accept the JIC elbows for hose connectors.

      Spacer 1
      AMSOIL Aluminum Billet Oil Fill and Oil Filter Caps for Bypass Filters
      Summary

      Dodge 5.9L/6.7L Cummins Diesels
      To ease installation of the BMK21 in 2004 and later model Dodge pickups equipped with the 5.9L Cummins diesel engine, AMSOIL offers the new 1/8" NPT - 1/4" JIC fitting (BP241), the Aluminum Billet Oil Fill Cap for Dodge 5.9L Cummins diesels (BK1301) and the 90-degree JIC Elbow (BP242). The BP241 fits onto the existing plug on top of the OEM full-flow filter mount, and the addition of the BK1301 eases the installation of the oil return line.

      General Motors 6.6L Duramax
      To provide GM Duramax owners the same ease of installing the BMK21, AMSOIL offers an oil filter “Sandwich” adapter (BK1201). The Sandwich adapter is an anodized billet aluminum adapter that screws on to the present full flow oil filter nipple located on the engine block. The full flow filter is then simply spun on to the adapter. The Sandwich adapter has an orifice to provide high-pressure oil feed for the BMK21. Like the other diesel applications, AMSOIL offers an Aluminum Billet Oil Filler Cap for (BK1202) to ease the installation of the oil flow from the BMK21 back to the engine.
      Product Code: BF

      BUY IT NOW

      AMSOIL AIR FILTRATION BANNER SEPARATOR
      Summary AMSOIL EaA Absolute Efficiency Air Filters and Filtration Products
      Banner SPACER 8
      AMSOIL Absolute Efficiency Air Filters with Nanofiber Technology EaA
      Summary

      What are the Benefits of AMSOIL Ea Absolute Efficiency Air Filters with Nanofiber Technology?

      AMSOIL Absolute Efficiency EaA Air Filters with Nanofiber Technology AMSOIL Absolute Efficiency EaAU Air Induction Filters with Nanofiber Technology AMSOIL Absolute Efficiency EaAR Racing and Off-Road Air Filters with Nanofiber Technology

      • Extends service intervals through increased Capacity
      • Better Capacity than wet cotton gauze or cellulose
      • Offers a high level of engine protection though Efficiency
      • Better Efficiency than wet cotton gauze or cellulose
      • Highest Efficiency rating in the industry
      • Maintains high permeability or Flow through its life cycle
      • Advanced “Cleanable” properties and attributes (reusable)
      • 100,000 mile AMSOIL guarantee / Extended Service Intervals
      • Cost effective / Reduced operation costs
      • OEM Certified Fitment
      • Elimination of potential OEM warranty issues
      AMSOIL Absolute Efficiency Air Filters with Nanofiber Technology EaA
      Summary

      AMSOIL EaA Absolute Efficiency Air Filters

      AMSOIL Absolute Efficiency EaA Air Filters with Nanofiber TechnologyAnother first for AMSOIL. Positioning itself to be a world class leader in filtration, the AMSOIL EaA Absolute Efficiency Ea Air Filter is incomparable in both design and performance. AMSOIL Absolute Efficiency Ea Air Filters are the most efficient filters available to the car/light truck market.These high efficiency air filters utilize nanofiber technology and come with a four year/100,000 mile service life guarantee and superior air flow. Nanofiber technology has been used exclusively in heavy duty applications, including the U.S. Army’s Abrams M1 tank. AMSOIL has brought this technology to the auto and light truck market, and is proprietary to AMSOIL. Ea Air Filters’ synthetic nanofiber media removes 5 times more dust than traditional cellulose filter media alone and 50 times more dust than wet gauze filter media. AMSOIL Ea Air Filters have a service life of 100,000 miles or four years, whichever comes first.

      EaA Air Filters have 50x the efficiency, 15x the capacity and the same air flow of wet gauze air filters, all for less cost.
      Product Code: EAA

      BUY IT NOW

      AMSOIL Absolute Efficiency Air Induction Filters with Nanofiber Technology EaAU
      Summary

      AMSOIL EaAU Absolute Efficiency Air Induction Filters

      AMSOIL Absolute Efficiency EaAU Air Induction Filters with Nanofiber TechnologyMore cold air = more horsepower! AMSOIL now offers universal air induction filters (EaAU) designed to replace stock oil wetted gauze or foam conical filters that were supplied with custom induction systems produced by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and more. AMSOIL Ea Air Induction Filters fit most of the popular intake systems available. They provide improved cold air intake and a level of engine protection only an Ea Filter can provide. AMSOIL Ea Air Induction Filters offer better efficiency, excellent airflow and are cleanable. The same great state-of-the-art nanofiber technology with all the benefits now available in these shapes!
      Product Code: EaAU

      BUY IT NOW

      AMSOIL Absolute Efficiency Racing Air Filters with Nanofiber Technology EaAR
      Summary

      AMSOIL EaAR Absolute Efficiency Racing Air Filters

      AMSOIL Absolute Efficiency EaAR Racing and Off-Road Air Filters with Nanofiber TechnologyAMSOIL custom EaAR filter assemblies are designed with the racer in mind. They incorporate good looks and excellent air flow, as well as the high efficiency customers expect from Ea technology. EaAR Air Filters are specially designed for racing and street rod enthusiasts who desire Ea protection in carbureted applications. AMSOIL EaAR Air Filters are constructed with the same dedication to quality as all other Ea filters. AMSOIL EaAR filter kits provide racers with more power through the new Ea air flow lids. Not only does the Ea air flow lid add filter area, it actually redirects airflow inside the filter to pull in more air through the side pleats for even greater performance efficiency. Cleanable and reusable, the AMSOIL Ea air flow lid delivers the best protection available for engines, and it comes in a wide range of applications. The air flow lids feature a polished aluminum trim ring with AMSOIL logos etched in the surface. Pre-filters are available to extend service intervals.
      Product Code: EAAR

      BUY IT NOW

      AMSOIL Pre-Filters for Racing and Off-Road Air Filters EaPF
      Summary

      AMSOIL Pre-Filters

      AMSOIL EaPF Prefilters for Racing and Off-Road ApplicationsRacers and off-road enthusiasts subject their vehicles to some of the most severe conditions possible. These vehicles operate in areas of heavy dirt and mud that gets slung into every crack and corner, often clogging air filters. AMSOIL Ea Pre-Filters are designed to keep larger particles from getting into and clogging the pleats of air filters. When an air filter is clogged, the engine loses horsepower and, in the case of Ea Air Filters, the filter must be cleaned. There is no vacuum or compressed air available on the race track or out in the swamp, but an Ea Pre-Filter is easily removed and shaken free of debris in seconds. Ea Pre-Filters fit over the top of existing air filters. These polyester mesh bags feature an industrial grade elastic band at the opening to ensure the pre-filter does not slide off.
      Product Code: EAPF

      BUY IT NOW

      AMSOIL Donaldson Power Core Air Filters PCF
      Summary

      PowerCore® Air Filters

      Donaldson PowerCore Air Filter for 6.0L Ford PowerStrokeAMSOIL offers premium air filters that utilize PowerCore™ filtration technology for Ford 6.0L Diesel PowerStroke™, GM H2 Hummer 6.0L Vortec™ and 2006 – 2008, GM 6.6L Duramax Diesel, selected Freightliner, and John Deere applications. The rugged structure of PowerCore™ filters features an innovative, layered, fluted filter media, which allows air to enter an open flute while forcing it out an adjacent flute, allowing only clean air into the engine. Dirty air is effectively filtered and cleaned in only one pass through the media. Donaldson PowerCore™ Air Filters are widely known in the heavy-duty market for being reliable, premium products. Their flawless reputation and proven performance make Donaldson filters a perfect match for AMSOIL.
      Product Code: PCF

      BUY IT NOW

      Donaldson 7.3L Ford Power Stroke Diesel Air Induction System from AMSOIL PCIS73
      Summary

      Donaldson 7.3L Ford PowerStroke Diesel Air Induction System

      AMSOIL PowerCore 7.3L PowerStroke Air Induction SystemNow a Donaldson retrofit air induction system kit for Ford 7.3L PowerStroke owners! The PowerCore Air Induction System replaces the present air intake system and utilizes a Donaldson PowerCore filter to provide unmatched performance and filtering efficiency on 1999 through 2003 model year F-250 to F-550 Super Duty trucks and SUVs with 7.3L PowerStroke Diesel engines. Improved fuel economy, increased horsepower, greater filtering capacity and greater filter capacity. More capacity means more engine protection. The PowerCore air filter has over 16 times more media surface area than washable filters, and 3 times the media surface of conventional filters. The PowerCore air filter has five times more dust holding capacity than washable/reusable air filters and twice the capacity over premium quality traditional filters. Greater capacity also means changing filters less often, even in more severe service situations.
      Product Code: PCIS73

      BUY IT NOW

      AMSOIL Nanofiber Ea Absolute Efficiency Filter Basics Ea
      Summary

       Synthetic Nanofiber Basics


      Nanofiber Filter Media Traps Sub-Micron Size Particles
      on the Nanofiber Surface, Preventing Particles from
      Lodging in the Filter Media Depth

       

       

      AMSOIL Fuel Additives Banner Separator
      Summary AMSOIL Fuel Additives
      Banner Separator 9
      AMSOIL Dominator Octane Boost AOB
      Summary

      AMSOIL Dominator® Octane Boost

      AMSOIL Dominator Octane Boost


      Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use. Excellent as a lead substitute at same treat rates in collector automobiles, older off-road equipment and pleasure vehicles. Usual treat rate is one 12oz. bottle to 15 gallons of gasoline.
      Product Code: AOB

       

      BUY IT NOW 

      AMSOIL P.i. Performance Improver Concentrate
      Summary

      AMSOIL P.i. Performance Improver Concentrate

      AMSOIL P.I. Performance Improver Gasoline AdditiveNewly reformulated, AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability. AMSOIL P.i. maximizes fuel efficiency by dissolving and removing fuel system deposits and other contaminants for improved power and overall performance. AMSOIL P.i. also works as an “emissions passer.” It is ideal for use prior to emissions inspections. Treat gas, run that tank and fill up again prior to test. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10% ethanol blended gas. Tests results show improved fuel efficiency between 2.3% and 5.7%. One bottle treats 20 gallons of gas. Treat one full tank of gas every 4,000 miles or 100 hours of service to protect peak efficiency. Improves fuel mileage an average of 2.3% and up to 5.7%
      Product Code: API

      BUY IT NOW 

      AMSOIL Diesel Injector Clean ADF
      Summary

      AMSOIL Diesel Injector Clean

      AMSOIL Diesel Injector Clean AMSOIL Diesel Injector Clean removes performance-robbing deposits from diesel fuel injectors to restore horsepower and improve fuel economy. It is formulated for all types of diesel engines, including high-pressure common-rail designs. Diesel Injector Clean is formulated to clean both the tough-to-remove internal diesel injector deposits surfacing in modern high-pressure common-rail diesel engines and traditional carbonaceous deposits. Unlike all-in-one fuel additives that may sacrifice performance in specific areas in the name of convenience, AMSOIL Diesel Injector Clean makes no sacrifices; it is purpose-built for diesel owners who demand maximum results. Ultra-low-sulfur diesel fuel (ULSD) has significantly reduced lubricity - a critical property in controlling wear in fuel pumps and injectors. AMSOIL Diesel Injector Clean adds back the lubricity the fuel pump and injectors need, improving service life and saving time and money on maintenance costs.
      Product Code: ADF

      BUY IT NOW

      AMSOIL Cetane Boost Diesel Fuel Additive ACB
      Summary

      AMSOIL Diesel Cetane Boost

      AMSOIL Diesel Cetane Boost Raises Cetane Number up to 7 Points for Maximum Horsepower


      AMSOIL Diesel Cetane Boost raises the cetane number of diesel fuel up to seven points for maximum horsepower, increased fuel economy and easier starts in all diesel engines. Diesel engines operate best on fuel with cetane values of 50 or higher. Most diesel fuel sold in North America has a cetane value of 40-45. Unlike all-in-one fuel additives that may sacrifice performance in specific areas in the name of convenience, AMSOIL Diesel Cetane Boost makes no sacrifices; it is purpose-built for diesel owners who demand maximum results. Fuel with a higher cetane number provides for a more complete burn, resulting in improved performance. By increasing cetane, AMSOIL Diesel Cetane Boost improves the ignition quality of diesel fuel, maximizing available power and improving starting. It also smooths idle and reduces smoke and emissions.

      Product Code: ACB

      BUY IT NOW

      AMSOIL Diesel Cold Flow ACF
      Summary

      AMSOIL Diesel Cold Flow

      AMSOIL Cold Flow for cold weather Formulated with an advanced deicer to enhance fuel flow and help prevent fuel filter plugging in cold temperatures. AMSOIL Diesel Cold Flow is formulated for a broad range of diesel fuels, including #1 diesel, #2 diesel, biodiesel and ultra-low-sulfur diesel (ULSD). AMSOIL Diesel Cold Flow combats diesel fuel gelling by improving diesel cold-flow ability. Unlike all-in-one fuel additives that may sacrifice performance in specific areas in the name of convenience, AMSOIL Diesel Cold Flow makes no sacrifices; it is purpose-built for diesel owners who demand maximum results. Reduces need for #1 diesel fuel.
      Product Code: ACF

      BUY IT NOW

      AMSOIL Gasoline Stabilizer AST
      Summary

      AMSOIL Gasoline Stabilizer

      AMSOIL Gasoline Stabilizer fights fuel deteriorationFights fuel deterioration! Gasoline is not formulated for long-term storage and can start to degrade in as little as 60 days, leading to varnish and sludge deposits that clog injectors, fuel lines and carburetors, stick floats and cause poor engine performance, starting problems, increased maintenance expenses and decreased equipment life. AMSOIL Gasoline Stabilizer is suitable for gasoline or diesel fuel, and keeps fuel from deteriorating during storage allowing easier start-ups. It resists the formation of varnish and gum in fuel systems and storage tanks. Ideal for all two- and four-cycle engines, including motorcycles, snowmobiles, boats, ATVs, edgers, tillers, mowers, cars, trucks, snow blowers, chain saws, generators, farm and construction equipment. Mixes 1 oz. to 2.5 gallons of fuel.
      Product Code: AST

      BUY IT NOW

      AMSOIL Specialty Fluids Banner Separator
      Summary AMSOIL Manufactures Many High Quality Products in Addition to the Best Synthetic Lubricants and Filters
      Banner Separator 10
      AMSOIL Dominator Coolant Boost RDCB
      Summary

      AMSOIL Dominator® Coolant Boost

      AMSOIL Dominator Coolant Boost Provides Effective Heat Transfer and Enhanced Corrosion ProtectionLowers engine temperatures up to 19º! Racers demand lower engine operating temperatures in order to achieve maximum efficiency and horsepower on the track. AMSOIL Dominator Coolant Boost provides racers and motorists with significantly lower engine operating temperatures, quicker engine warm-up times and advanced corrosion protection. Minimizes or eliminates aluminum and metal corrosion while lowering operating temperatures. AMSOIL Dominator Coolant Boost is recommended for both racing applications using straight water coolant and automotive applications using 50/50 coolant/water mixtures.
      Product Code: RDCB

      BUY IT NOW

      AMSOIL Engine and Transmission Flush FLSH
      Summary

      AMSOIL Engine and Transmission Flush

      AMSOIL Engine and Transmission Flush Prepares Engines and Transmissions for New Oil FLSH AMSOIL Engine and Transmission Flush helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Its potent, detergent-based (vs. solvent-based) formula cleans sludge and deposit build-up, promoting lower operating temperatures and reduced oil consumption. AMSOIL Engine and Transmission Flush is safe on parts and can be easily disposed of with waste oil. Though it works in one treatment, AMSOIL Engine and Transmission Flush can be used at every oil change.
      Product Code: FLSH

      BUY IT NOW

      AMSOIL Power Foam APF
      Summary

      AMSOIL Power Foam®

      AMSOIL Power Foam Carburetor and Induction System Cleaner
      A very effective Carburetor and Induction System Cleaner for Two - and Four-Stroke Gasoline Engines. AMSOIL Power Foam® improves engine performance by removing gum, varnish and carbon deposits that affect power, operation, idle and fuel economy. Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. AMSOIL Power Foam helps reduce engine ping and keeps carburetors and injector systems operating like new. Power Foam is safe for fuel injectors, catalytic converters and emission control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.
      Product Code: APF

      BUY IT NOW 

      AMSOIL Metal Protector MP AMP
      Summary

      AMSOIL MP Metal Protector

      AMSOIL MP Metal Protector AMSOIL Metal Protector is a synthetic, greaseless all-purpose lubricant that provides metal surfaces with a long-lasting film. It is versatile by being effective in applications as diverse as hardware, household appliances, sporting goods and electrical equipment. AMSOIL Metal Protector’s penetrating agents cut through rust and corrosion to allow free movement of parts. AMSOIL MP is the product of choice for drying electrical and ignition systems and protecting electrical equipment from freshwater and saltwater damage. AMSOIL MP Metal Protector is also the product of choice for protecting firearms and other fine componentry. It contains no silicone. AMSOIL MP is compatible with plastic, leather, fabric, fishing line and paint.
      Product Code: AMP

      BUY IT NOW

      AMSOIL Heavy Duty Metal Protector MPHD
      Summary

      AMSOIL MPHD Heavy Duty Metal Protector

      AMSOIL MPHD Heavy Duty Metal ProtectorThe ideal chain lube! AMSOIL Heavy Duty Metal Protector is the product of choice for metal surfaces that require a heavy duty lubricant or are exposed to the damaging effects of salt, moisture or chemical corrosion. It is ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains. AMSOIL Heavy Duty Metal Protector is excellent for undercoating car doors, wheelwells, rocker panels seams and other metal surfaces exposed to water, dirt or road salt.
      Product Code: AMH

      BUY IT NOW

      AMSOIL Propylene Glycol Biodegradable Antifreeze and Engine Coolant
      Summary

      AMSOIL Propylene Glycol Biodegradable Antifreeze and Engine Coolant

      AMSOIL Propylene Glycol Anti-Freeze and Engine CoolantAMSOIL Antifreeze & Coolant is newly formulated to provide benefits far beyond those found in today’s conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifreeze and cooling protection in the most extreme temperatures and operating conditions. It can be used for seven years of 250,000 miles in passenger cars, light-duty trucks, vans and recreational vehicles. It lasts seven years or 750,000 miles in over-the-road diesel trucks. AMSOIL Antifreeze & Coolant is dyed neutral yellow and is compatible with all ethylene and propylene antifreeze and coolant formulations on the market, including DEX-Cool™®, Sierra™®, and Zerex™®. It is also compatible with fully formulated diesel antifreezes and other organic acid technology (OAT) and hybrid organic acid technology (HOAT) formulations.
      Product Code: ANT

      BUY IT NOW

      AMSOIL Synthetic Universal Power Steering Fluid PSF
      Summary AMSOIL Synthetic Universal Power Steering Fluid 


      AMSOIL Synthetic Universal Power Steering Fluid PSF
      Power steering fluid is one of the most neglected fluids under the hood because no one thinks about it unless there is a problem. Power steering fluid should be changed at regular intervals, and many OEM’s recommend changing the fluid because of accumulation of wear material and other debris within the power steering system. AMSOIL Synthetic Universal Power Steering Fluid provides excellent wear protection. Its synthetic formulation delivers better lubricity and reduced friction, resulting in cooler operating temperatures, longer component life and quieter operation. Its low pour point ensures immediate lubrication at startup and in cold temperatures, yet it resists thermal breakdown and maintains maximum protection in high temperatures. AMSOIL Synthetic Universal Power Steering Fluid meets or exceeds motor vehicle specifications for use in GM, Chrysler, Honda, Ford, Volkswagen, Mercedes, Saab, Subaru and Audi applications, plus many more applications.
      Product Code: PSF

      BUY IT NOW

      AMSOIL Series 500 High-Performance DOT 3 Brake Fluid BF3
      Summary

      AMSOIL Series 500 High-Performance DOT 3 Brake Fluid

      AMSOIL Series 500 High Performance DOT 3 Brake FluidMany owner’s manuals recommend changing brake fluid every 24 months to remove moisture. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications. As the brake system heats up, brake fluids with low boiling points begin to vaporize. The brake pedal must travel further to apply the same amount of force on the brakes, causing a spongy feeling. If enough of the brake fluid vaporizes, brake system failure may occur. AMSOIL Series 500 High-Performance DOT 3 Brake Fluid is formulated with the best zinc-based anti-corrosion additives and pH stabilizers. It is designed for high-temperature stability, yet flows easily at low temperatures. AMSOIL Series 500 High-Performance DOT 3 Brake Fluid’s superior additive package provides good lubrication throughout the system and can raise boiling points to more than 232°C (450°F). AMSOIL Series 500 High-Performance DOT 3 Brake Fluid remains non-compressible, even at the highest pressures generated in automotive brake systems. Thus, AMSOIL Brake Fluid provides superior stopping ability under the most demanding conditions. AMSOIL Series 500 High-Performance DOT 3 Brake Fluid has a dry ERBP of 274°C (525°F) and wet ERBP of 156°C (313°F).
      Product Code: BF3

      BUY IT NOW

      AMSOIL Series 600 DOT 4 Racing Brake Fluid BF4
      Summary

      AMSOIL Series 600 DOT 4 Racing Brake Fluid

      AMSOIL Series 600 High Performance DOT 4 Brake FluidTheir higher boiling points make DOT 4 fluids appropriate for high-performance cars and motorcycles and for vehicles used for towing or in mountainous regions. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications. As the brake system heats up, brake fluids with low boiling points begin to vaporize. AMSOIL Series 600 DOT 4 Racing Brake Fluid is designed for high-temperature stability, yet flows easily at low temperatures. Its superior additive package provides good lubrication throughout the system and can raise boiling points to more than 232°C (450°F). The minimum dry ERBP for DOT 4 brake fluid is 230°C (446°F), while the minimum wet ERBP is 155°C (311°F). AMSOIL Series 600 DOT 4 Racing Brake Fluid has a dry ERBP of 304°C (580°F) and wet ERBP of 210°C (410°F). AMSOIL Series 600 DOT 4 Racing Brake Fluid is also formulated with the best zinc-based anti-corrosion additives and pH stabilizers. 
      Product Code: BF4

      BUY IT NOW

      AMSOIL Additional Links Page 1
      Summary

      For Information on Additional Products:

       

      Oil Analysis Safely Extends the Service Life of AMSOIL Synthetic LubricantsOil Analyzers, Inc. - for Oil and Fluid Analysis
      AMSOIL Offshore Racer Bob Teague Rebuilds Program Team AMSOIL offshore racer Bob Teague has rebuilt his program after a year of upheaval and uncertainty.In 2013, the Offshore Powerboat Association (OP
      For Snowmobiles, Why Cold-Flow Properties Make a DifferenceTwo- and four-stroke snowmobiles use different oiling systems, but both require oils with excellent cold-flow properties for maximum protecti
      AMSOIL Update on Pennzoil's "motor oil reimagined" Marketing CampaignPennzoil’s “motor oil reimagined” marketing campaign is based on gas-to-liquid (GTL) base oil technology. Consumers should be awa
      AMSOIL Introduces new Synthetic CVT Fluid for CVT Transmissions AMSOIL Synthetic CVT Fluid for CVT transmissions is now available in quarts, 2 1/2 gallon bottles, and 55-gallon drums.AMSOIL Synth
      AMSOIL has always been unconventional. AMSOIL's founder held an unconventional belief in synthetic motor oil when no other lubricant company did. It became official when AMSOIL introduced the world