AMSOIL P.i. Performance Improver Concentrate

Newly reformulated, AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability. AMSOIL P.i. maximizes fuel efficiency by dissolving and removing fuel system deposits and other contaminants for improved power and overall performance. AMSOIL P.i. also works as an “emissions passer.” It is ideal for use prior to emissions inspections. Treat gas, run that tank and fill up again prior to test. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10% ethanol blended gas. Tests results show improved fuel efficiency between 2.3% and 5.7%. One bottle treats 20 gallons of gas. Treat one full tank of gas every 4,000 miles or 100 hours of service to protect peak efficiency. Improves fuel mileage an average of 2.3% and up to 5.7%
Product Code: API

BUY IT NOW 

 AMSOIL Quickshot SE

The premium fuel additive to thoroughly clean and restore peak performance in small engine and powersports equipment fuel systems. Degraded fuel presents a major maintenance issue in small engines and powersports equipment. AMSOIL Quickshot SE’s revolutionary technology focuses on three major fuel-related issues plaguing small engines and powersports equipment: ethanol, water and dirty pump gas. They can form varnish, gum and insoluble debris that clog carburetors, fuel injectors and fuel filters. Carbon buildup can form on the tops of pistons that leads to pre-ignition, rough idling and poor throttle response. Fuel-related problems are only expected to intensify in the coming years as the ethanol content in pump gasoline continues to increase. AMSOIL Quickshot SE also stabilizes fuel between uses and during short-term storage periods.
Product Code: AQS

BUY IT NOW

AMSOIL Series 2000 Octane Boost

AMSOIL Series 2000 Octane Boost improves the performance of all two-cycle and four-cycle gasoline-fueled engines, and increases octane number by up to 7 points. Just one treatment significantly increases engine response and power. AMSOIL Series 2000 Octane Boost reduces engine knock, improves ignition, helps fuel burn cleaner and inhibits corrosion. It is highly recommended for all high performance off-road and racing applications. Excellent as a lead substitute at same treat rates in collector automobiles, older off-road equipment and pleasure vehicles. Usual mix ratio is one 12oz. bottle to 15 gallons of gasoline.
Product Code: AOB

AMSOIL Cetane Boost Diesel Fuel Additive

AMSOIL Cetane Boost Diesel Fuel Additive is an ashless, alcohol-free additive that improves cetane up to seven points for increased power and performance in all diesel engines, especially high performance designs. Supported by extensive testing and years of field trial use, AMSOIL Cetane Boost Diesel Fuel Additive has repeatedly demonstrated its ability to improve diesel engine performance. AMSOIL Cetane Boost encourages timely, uniform fuel ignition, discourages high pressure rate rise during the combustion cycle and solves startability and driveability problems associated with low cetane number diesel fuels. High performance diesel engines operate best with cetane values of 50 or higher. Mixes 1oz. to 5 gallons of diesel fuel.
Product Code: ACB

AMSOIL Diesel Concentrate

AMSOIL Diesel Concentrate has been reformulated with additional lubricity properties to address the issues involved with Ultra Low Sulfur Diesel (ULSD) Fuel. The new AMSOIL Diesel Concentrate is a total system cleaner and lubricity improver for all types of diesel engines, including automotive, light truck, heavy duty and marine applications. AMSOIL Diesel Concentrate compensates for the quality variances of different fuels (including biodiesels) and the deficiencies of today’s ULSD for better engine operation. The Environmental Protection Agency (EPA) mandated major changes for Ultra Low Sulfur Diesel fuel (ULSD), bringing the sulfur content to 15 ppm, a staggering drop from the previous requirement of 500 ppm. Lower sulfur means lower lubricity, the property that controls wear in the fuel injectors and fuel pump. AMSOIL Diesel Concentrate is recommended for use with all types of heavy and light-duty, on or off-road diesels and marine diesel engines. The recommended mix ratio is one oz. of additive per five gallons of fuel.
Product Code: ADF

AMSOIL Diesel Cold Flow Improver

Use with AMSOIL Diesel Concentrate to improve cold-weather performance in applications below 40º F. Diesel fuel forms wax crystals and gels in cold temperatures, plugging the fuel filter and affecting engine operation. AMSOIL Diesel Cold Flow Improver for diesel fuel lowers the cold filter plugging point by as much as 34º F and decreases the need for #1 diesel fuel that is diluted with kerosene. It functions by modifying the wax crystal formation at low temperatures to depress the pour point and improve the cold flow filtration properties.  AMSOIL Diesel Cold Flow Improver contains jet fuel-type deicer to help prevent ice formation in fuels contaminated with water. It is compatible with diesel exhaust particulate filters (DPFs), and is excellent for use with AMSOIL Diesel Concentrate and AMSOIL Cetane Boost Additive. Recommended mix ratio is 2oz. to 5 gallons of fuel.
Product Code: ACF

AMSOIL Gasoline and Diesel Fuel Stabilizer

Suitable for both gasoline and diesel fuels. AMSOIL Gasoline Stabilizer keeps fuel from deteriorating during storage by reducing the oxidation process and prevents varnish and gum build-up. These contaminates can clog injectors, stick floats and cause poor engine startup. It is difficult to drain all of the fuel from equipment before storage, and doing so would expose the system to other problems, including the formation of rust and corrosion on the bare metal in the tank and fuel system, and the drying and cracking of gaskets and seals. Some fuels are pre-treated with oxidation inhibitors that allow them to be stored for short periods without forming excessive deposits, while other fuels have no inhibitors at all. AMSOIL Fuel Stabilizer reduces the oxidation process that occurs when fuel is stored for extended periods, improving performance, extending equipment life and decreasing maintenance expenses. Mixes 1oz. to 2.5 gallons of fuel.
Product Code: AST